ALE1PF05 데이터 시트보기 (PDF) - Panasonic Corporation
부품명
상세내역
제조사
ALE1PF05 Datasheet PDF : 7 Pages
| |||
LE (ALE)
2. Specifications
Characteristics
Item
Arrangement
Contact resistance (Initial)
Contact material
Contact rating
Contact rating (resistive)
Max. switching power (resistive)
Max. switching voltage
Max. switching current
Min. switching load (reference value)*1
Insulation resistance (Initial)
Dielectric strength (Initial)
Between open contacts
Between contact and coil
Surge withstand voltage (Initial)*2
Between contact and coil
Time
characteristics
Operate time
Release time
Mechanical
characteristics
Shock resistance
Vibration resistance
Mechanical life (at 180 times/min.)
Functional
Destructive
Functional
Destructive
Conditions for operation, transport and storage*3
Unit weight
Specifications
1 Form A
Max. 100 mΩ (By voltage drop 6 V DC 1A)
AgSnO2 type
16A 277V AC
4,432VA
277V AC
16A
100mA, 5V DC
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Dielectric strength” section.
1,000 Vrms for 1 min. (Detection current: 10 mA)
4,000 Vrms for 1 min. (Detection current: 10 mA)
10,000 V
Max. 20 ms (at rated voltage), (at 20°C 68°F), (Initial) (excluding contact bounce time.)
Max. 20 ms, Max. 25 ms (200mW type) (at rated voltage), (at 20°C 68°F), (Initial) (excluding
contact bounce time) (With diode)
200 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10μs.)
10 to 55 Hz at double amplitude of 1.5 mm
Min. 2×106
Ambient temperature: –40°C to +85°C –40°F to +185°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Air pressure: 86 to 106 kPa
Approx. 17 g .60 oz, Approx. 15 g .53 oz (PCB type)
* Specifications will vary with foreign standards certification ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50μs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
3. Electrical life
Condition: Resistive, at 20°C 68°F, at 20 times/min.
Type
1 Form A
Contact rating
16A 277V AC
Number of operation
105
REFERENCE DATA
1.-(1) Coil temperature rise (400mW type)
Sample: ALE14B12, 6 pcs.
Point measured: coil inside
Ambient temperature: 25°C 77°F, 85°C 185°F
60
25°C
85°C
50
16A
12A
0A
16A
40
12A
0A
30
20
10
0
0 80
100
145
Coil applied voltage, %V
1.-(2) Coil temperature rise (200mW type)
Sample: ALE74B12, 6 pcs.
Point measured: coil inside
Ambient temperature: 23.7°C 74.66°F, 85°C 185°F
30
23.7°C
16A
85°C
25
16A
0A
20
0A
15
10
5
0
0 80
100
145
Coil applied voltage, %V
2. Life curve
100
250V AC resistive load
10
1 0 2 4 6 8 10 12 14 16
Contact current, A
–3–
ASCTB194E 201610-T
Share Link: 