VND5025AK-E(2007) 데이터 시트보기 (PDF) - STMicroelectronics
부품명
상세내역
제조사
VND5025AK-E
(Rev.:2007)
(Rev.:2007)
STMicroelectronics
VND5025AK-E Datasheet PDF : 32 Pages
| |||
VND5025AK-E
Double channel high side driver with analog
current sense for automotive applications
Features
Max transient supply voltage
Operating voltage range
Max On-State resistance (per ch.)
Current limitation (typ)
Off state supply current
VCC
41V
VCC 4.5 to 36V
RON 25 mΩ
ILIMH
IS
41 A
2 µA(1)
1. Typical value with all loads connected
■ Main
– In-rush current active management by
power limitation
– Very low stand-by current
– 3.0V CMOS compatible input
– Optimized electromagnetic emission
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
European directive
– Package: ECOPACK®
■ Diagnostic functions
– Proportional load current sense
– High current sense precision for wide range
currents
– Current sense disable
– Thermal shutdown indication
– Very low current sense leakage
■ Protection
– Undervoltage shut-down
– Overvoltage clamp
– Load current limitation
– Self-limiting of fast thermal transients
– Protection against loss of ground and loss
of VCC
– Thermal shut down
– Reverse battery protection
– Electrostatic discharge protection
PowerSSO-24™
Description
The VND5025AK-E is a monolithic device made
using STMicroelectronics VIPower M0-5
technology, intended for driving resistive or
inductive loads with one side connected to
ground, and suitable for driving LEDs.
Active VCC pin voltage clamp protects the device
against low energy spikes (see ISO7637 transient
compatibility table).
This device integrates an analog current sense
which delivers a current proportional to the load
current (according to a known ratio) when
CS_DIS is driven low or left open.
When CS_DIS is driven high, the CURRENT
SENSE pin is in a high impedance condition.
Output current limitation protects the device in
overload condition. In case of long overload
duration, the device limits the dissipated power to
safe level up to thermal shut-down intervention.
Thermal shut-down with automatic restart allows
the device to recover normal operation as soon as
fault condition disappears.
Table 1. Device summary
Package
PowerSSO-24™
Tube
VND5025AK-E
Tape and Reel
VND5025AKTR-E
June 2007
Rev 3
1/31
www.st.com
1
Share Link: