ATASTK512-EK2-IND 데이터 시트보기 (PDF) - Atmel Corporation

부품명

상세내역

제조사

ATASTK512-EK2-IND

AVR-based Uni-directional Radio Starter Kit Featuring Secure Rolling-Code RF Transmission Encryption User Guide

Atmel Corporation 

Getting Started

Step C: Mount the Receiver Application Board

The Receiver Application Board must be mounted on the STK512 Interface Board. The completed

assembly is shown in Figure 2-5.

Figure 2-5. Completed Receiver Assembly

Caution: After the next step, if the receiver board is removed from the interface board sockets, use

EXTREME caution! The pins on the receiver board are very easily bent and broken! Use a rocking

motion to lift the board straight (perpendicular) out of the socket.

1. Orient the receiver board above the Interface Board as shown in Figure 2-5. Carefully insert the

Receiver Application Board into the STK512 Interface Board sockets.

2. Install the antenna onto the SMB connector.

3. Supply the STK500 with +12 V power by connecting it to a PC using the RS232 port.

STK512 User Guide

2-5

5170C–AVR–10/09

Share Link: