XAL5030-161MED 데이터 시트보기 (PDF) - Unspecified
부품명
상세내역
제조사
XAL5030-161MED Datasheet PDF : 5 Pages
| |||
Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 908-1
Shielded Power Inductors – XAL50xx
Halogen
Free
AEC
Q200 +125°C
• High current; very low DCR; soft saturation
• AEC-200 Grade 1 qualified (–40°C to +125°C ambient)
Designer’s Kit C445 contains 3 of each value
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper
Other terminations available at additional cost.
Weight XAL5030: 0.44 – 0.51 g; XAL5050: 0.74 – 0.80 g
Operating voltage: 0 – 55 V
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Inductance2 DCR (mOhms)3
Part number1 ±20% (µH)
typ max
XAL5030-161ME_
0.16
XAL5030-331ME_
0.33
XAL5030-601ME_
0.60
XAL5030-801ME_
0.80
XAL5030-102ME_
1.0
2.15 2.36
3.20 3.52
4.11 4.52
5.14 5.65
8.50 9.40
XAL5030-122ME_
1.2
XAL5030-222ME_
2.2
XAL5030-332ME_
3.3
XAL5030-472ME_
4.7
XAL5050-562ME_
5.6
11.40
13.20
21.20
36.00
23.45
12.40
14.50
23.30
40.00
25.80
XAL5050-682ME_
6.8
XAL5050-822ME_
8.2
XAL5050-103ME_ 10
XAL5050-153ME_ 15
XAL5050-223ME_ 22
26.75
31.75
40.90
69.70
90.60
29.45
34.95
45.00
76.70
99.65
SRF typ4
(MHz)
183
108
75
63
68
45
38
28
23
25
21
18
15
13
11
Isat5 Irms (A)6
(A) 20°C rise 40°C rise
31.0
14.2
22.2
26.0
13.8
19.2
19.8
13.6
17.7
18.5
10.0
13.0
14.0
8.7
11.1
12.5
7.9
10.4
9.2
7.2
9.7
8.7
5.9
8.1
6.7
4.3
5.9
6.3
5.3
7.2
6.0
4.7
6.4
5.6
4.5
6.1
4.9
3.6
4.9
3.7
2.9
3.9
3.6
2.5
3.4
1. When ordering, please specify termination and packaging code:
XAL5030-472MEC
Termination: E = Halogen free component. RoHS compliant tin-silver over copper terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C =7″ machine-ready reel. EIA-481 embossed plastic tape.
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern,
trace size, and proximity to
other components. Therefore
temperature rise should be
verified in application conditions.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 908-1 Revised 11/02/18
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Share Link: 