CBS1002403 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

제조사

CBS1002403

Power module type

Unspecified 

Power module type

Ordering information

CBS100

CB S 100 48 12 -O

123456

1Series name

R

2Single output

3Output wattage

4Input voltage

24:DC18 - 36V

48:DC36 - 76V

5Output voltage

6Optional

R :with Remote ON/OFF

Positive logic control

T :with Mounting hole

f3.4 thru

FO:with Addition of a

Heat sink

TRC ELECTRONICS, INC.

135 Pasadena Ave.

Lodi, NJ 07644 USA

Tel: 973.779.8282

Fax: 973.779.1490

www.trcelectronics.com

"Stocking Distributor"

MODEL

MAX OUTPUT WATTAGE[W]

DC OUTPUT

CBS1002403 CBS1002405 CBS1002412 CBS1002415 CBS1002424 CBS1002428 CBS1004803 CBS1004805 CBS1004812 CBS1004815 CBS1004824 CBS1004828

77.2 100.0 100.8 100.5 100.8 100.8 77.2 100.0 100.8 100.5 100.8 100.8

3.3V 23.4A 5V 20A 12V 8.4A 15V 6.7A 24V 4.2A 28V 3.6A 3.3V 23.4A 5V 20A 12V 8.4A 15V 6.7A 24V 4.2A 28V 3.6A

SPECIFICATIONS

MODEL

=CBS1002403 CBS1002405 CBS1002412 =CBS1002415 =CBS1002424 CBS1002428 CBS1004803 CBS1004805 CBS1004812 CBS1004815 CBS1004824 CBS1004828

VOLTAGE[V]

DC18 - 36

DC36 - 76

INPUT

CURRENT[A]

*1 4.07typ 5.02typ 4.77typ 4.81typ 4.83typ 4.83typ 2.01typ 2.48typ 2.36typ 2.38typ 2.39typ 2.39typ

EFFICIENCY[%]

*1 79typ 83typ 88typ 87typ 87typ 87typ 80typ 84typ 89typ 88typ 88typ 88typ

VOLTAGE[V]

3.3

5

12

15

24

28

3.3

5

12

15

24

28

CURRENT[A]

23.4 20.0 8.4

6.7

4.2

3.6

23.4 20.0 8.4

6.7

4.2

3.6

LINE REGULATION[mV] 10max 10max 24max 30max 48max 56max 10max 10max 24max 30max 48max 56max

LOAD REGULATION[mV] 10max 10max 24max 30max 48max 56max 10max 10max 24max 30max 48max 56max

RIPPLE[mVp-p] -20 to +100C*2 80max 80max 120max 120max 120max 120max 80max 80max 120max 120max 120max 120max

-40 to -20C*2 120max 120max 150max 150max 150max 150max 120max 120max 150max 150max 150max 150max

RIPPLE NOISE[mVp-p] -20 to +100C*2 120max 120max 150max 150max 150max 150max 120max 120max 150max 150max 150max 150max

OUTPUT

-40 to -20C*2 200max 200max 200max 200max 250max 250max 200max 200max 200max 200max 250max 250max

TEMPERATURE REGULATION[mV] 0 to +65C 35max 50max 120max 150max 240max 280max 35max 50max 120max 150max 240max 280max

-40 to +100C 66max 100max 240max 300max 480max 560max 66max 100max 240max 300max 480max 560max

DRIFT[mV]

*3 16max 20max 40max 60max 90max 90max 16max 20max 40max 60max 90max 90max

START-UP TIME[ms]

200max (DCIN 24V, Io=100%)

200max (DCIN 48V, Io=100%)

Fixed (TRM pin open), 60 - 110% adjustable by external resistor

OUTPUT VOLTAGE ADJUSTMENT RANGE[V] *4

1.98 - 3.63 3.0 - 5.5 7.2 - 13.2 9.0 - 16.5 14.4 - 26.4 16.8 - 30.8 1.98 - 3.63 3.0 - 5.5 7.2 - 13.2 9.0 - 16.5 14.4 - 26.4 16.8 - 30.8

OUTPUT VOLTAGE SETTING[V] 3.25 - 3.45 4.90 - 5.20 11.74 - 12.46 14.55 - 15.45 23.28 - 24.72 27.16 - 28.84 3.25 - 3.45 4.90 - 5.20 11.74 - 12.46 14.55 - 15.45 23.28 - 24.72 27.16 - 28.84

OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically

PROTECTION OVERVOLTAGE PROTECTION[V] 4.00 - 5.50 5.75 - 7.00 13.80 - 16.80 17.25 - 21.00 27.60 - 33.60 32.20 - 39.20 4.00 - 5.50 5.75 - 7.00 13.80 - 16.80 17.25 - 21.00 27.60 - 33.60 32.20 - 39.20

CIRCUIT AND

OTHERS REMOTE SENSING

Provided

REMOTE ON/OFF

Provided (Negative logic L : ON, H : OFF)

INPUT-OUTPUT

DC1,500V or AC1,000V 1minute, Cutoff current = 10mA, DC500V 50MW min(20t15C)

ISOLATION INPUT-CASE PIN, BASE PLATE DC1,500V or AC1,000V 1minute, Cutoff current = 10mA, DC500V 50MW min(20t15C)

OUTPUT-CASE PIN, BASE PLATE AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20t15C)

OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +100C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max

STORAGE TEMP.,HUMID.AND ALTITUDE

ENVIRONMENT

CBS

VIBRATION

-40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max

10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis

IMPACT

196.1m/s2 (20G), 11ms, once each along X, Y and Z axis

SAFETY AGENCY APPROVALS UL60950, C-UL, EN60950

CASE SIZE/WEIGHT

OTHERS

COOLING METHOD

57.9X12.7X61.0mm (WXHXD) / 83g max

Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink)

*1 At rated input(DC24V,DC48V) and rated load.

*2 Ripple and ripple noise is measured by using measuring board

with recommended capacitor Co & the film capacmitoFr. 0.1

Measured by 20MHz oscilloscope or Ripple-Noise meter (Equiva

lent to KEISOKU-GIKEN:RM101).

*3 Drift is the change in DC output for an eight hour period af

ter a half-hour warmC-,uwpiatht 2th5e input voltage held constant at the rated input/ou

tput.

*4 When the input voltage is in the range of DC18 - 20V, DC36 -

40V output voltage adjustment range is 60 - 105%.

=marked models : Consult with us for delivery.

G-62

Share Link: