PT2262 데이터 시트보기 (PDF) - Princeton Technology

부품명

상세내역

제조사

PT2262

Remote Control Encoder

Princeton Technology 

Tel: 886-2-66296288

Fax: 886-2-29174598

URL: http://www.princeton.com.tw

Remote Control Encoder

PT2262

FUNCTIONAL DESCRIPTION

PT2262 encodes the code address and data set at A0 ~ A5 and A6/D5 ~ A11/D0 into a special

waveform and outputs it to the DOUT when TE is pulled to “0” (Low State). This waveform is fed to

either the RF modulator or the IR transmitter for transmission. The transmitted radio frequency or

infrared ray is received by the RF demodulator or IR receiver and reshaped to the special waveform.

PT2272 is then used to decode the waveform and set the corresponding output pin(s). Thus

completing a remote control encoding and decoding function.

RF OPERATION

CODE BITS

A Code Bit is the basic component of the encoded waveform, and can be classified as either an AD

(Address/Data) Bit or a SYNC (Synchronous) Bit.

Address/Data (AD) Bit Waveform

An AD Bit can be designated as Bit “0”, “1” or “f” if it is in low, high or floating state respectively. One bit

waveform consists of 2 pulse cycles. Each pulse cycle has 16 oscillating time periods. For further

details, please refer to the diagram below:

α

OSC

1 bit = 32α

Bit"0"

4α

Bit"1"

B i t " f"

Flo a t ing

12α

4α

where: α = Oscillating C lock P eriod

PT2262 V3.8

-4-

September, 2008

Share Link: