ADA4960-1 데이터 시트보기 (PDF) - Analog Devices
부품명
상세내역
제조사
ADA4960-1 Datasheet PDF : 6 Pages
| |||
Preliminary Technical Data
PIN CONFIGURATION AND FUNCTION DESCRIPTION
ADA4960-1
Figure 2. Pin Configuration
Table 2. Pin Function Descriptions
Pin No.
Mnemonic Description
1
VIP
Balanced Differential Input. Biased to VCOM.
2
IIP
Gain setting input, positive side. A resistor from this pin to pin 3 sets the gain for the device.
3
IIN
Gain setting input, negative side. A resistor from this pin to pin 3 sets the gain for the device..
4
VIN
Balanced Differential Input. Biased to VCOM.
5
VCIO
Common Mode buffer output.
6
VCI
Common Mode buffer input
7, 8, 9, 12
+Vs
Positive Supply.
10
VON
11
VOP
13
VC0M
16
PD
13, 14, 15, 16 GND
Balanced Differential Output. Biased to VCOM, typically ac-coupled.
Balanced Differential Output. Biased to VCOM, typically ac-coupled.
Common-Mode Voltage. A voltage applied to this pin sets the common-mode voltage of the input and
output. Typically decoupled to ground with a 0.1 μF capacitor. With no reference applied, input and output
common mode floats to midsupply (VCC/2).
Enable. Apply positive voltage (1.3 V < ENB < VCC) to activate device.
Ground. Connect to low impedance GND.
Rev. PrB | Page 5 of 6
Share Link: 