NXP Semiconductors
ISP1102
Advanced USB transceiver
8. ElectroStatic Discharge (ESD)
8.1 ESD protection
For the HBCC package, the pins that are connected to the USB connector (DP, DM,
VCC(5V0) and GND) have a minimum of ±12 kV ESD protection. The ±12 kV measurement
is limited by the test equipment. Capacitors of 4.7 µF connected from VREG3V3 to GND
and VCC(5V0) to GND are required to achieve this ±12 kV ESD protection (see Figure 4).
RC
1 MΩ
charge current
limit resistor
RD
1500 Ω
discharge
resistance
HIGH VOLTAGE
DC SOURCE
CS
100 pF
storage
capacitor
DEVICE UNDER
TEST
A
VCC(5V0)
VREG3V3
B
4.7 µF
4.7 µF
GND
004aaa145
Fig 4. Human body ESD test model
Remark: For the HVQFN package, the pins that are connected to the USB connector (DP,
DM, VCC(5V0) and GND) have a minimum of ±7 kV ESD protection.
8.2 ESD test conditions
A detailed report on test set up and results is available on request.
ISP1102_5
Product data sheet
Rev. 05 — 11 December 2007
© NXP B.V. 2007. All rights reserved.
8 of 25