Application Example
TA84007PQ/SG/FG
(Note 1)
R1 (Note 2)
VS
VCC
R2 (Note 3)
7/2/11
8/6/15
4/8/5
IN1
5/9/7
TA84007PQ/SG/FG
2/7/4
M
IN2
6/1/9
10/3/13
1/5/1
GND
TA84007PQ/SG/FG
Note 1: Experiment to determine the optimum capacity value (22 µF or greater) for the capacitor. Position the
capacitor near the pin (within 20 mm).
Note 2: Use a current limiting resistor (R1) to protect against overcurrent.
Note 3: If you wish to use the IC with VS = Vref, use a resistor to protect against Vref pin surge
Note 4: Utmost care is necessary in the design of the output, VCC, VM, and GND lines since the IC may be destroyed
by short-circuiting between outputs, air contamination faults, or faults due to improper grounding, or by
short-circuiting between contiguous pins.
Application Precautions
• Insert a stop (of about 100 µs) during switching (forward U reverse, forward/reverse U brake) to prevent against
in-rush current flow.
• IC functionality is not guaranteed when the IC is being powered on and off. Please confirm that there will be no
problems in your application in this regard.
10
2006-3-6