TC9329AFAG 데이터 시트보기 (PDF) - Toshiba
부품명
상세내역
제조사
TC9329AFAG Datasheet PDF : 83 Pages
| |||
TC9329AFAG/AFCG
Pin No. Symbol
Pin Name
Function and Operation
Remarks
55 XOUT
56 XIN
Crystal oscillator
pin
Crystal oscillator pins.
A reference 75 kHz crystal resonator is
connected to the XIN and XOUT pins.
The oscillator stops oscillating during
CKSTP instruction execution.
The VXT pin is the power supply for the
crystal oscillator. A stabilizing capacitor
(0.47 µF typ.) is connected.
Usually, the clock of a crystal oscillator
is used for the clock for peripheral
equipment. Through programming, the
built-in VCO can be changed to CPU
and CPU only operation can be
accelerated.
XOUT
ROUT
RfXT
VDD
XIN
58 VDB
59 C1
60 C2
61 VEE
62 C3
63 C4
64 VLCD
Voltage doubler
boosting output
pins
Voltage doubler boosting output pins.
The VDB pin doubles the VDD pin
voltage using the voltage doubler
boosting capacitor between C1 and C2.
The doubled voltage is used for the AD
converter and constant voltage circuit
(Vreg, VEE) power supply.
The VEE pin supplies a constant
voltage of 1.5 V from the VDB voltage.
The voltage is doubled (to 3 V) using
the voltage doubler boosting capacitor
between C3 and C4. The doubled
voltage is then supplied to the VLCD
pin. The VEE potential and the VLCD
potential are used to drive the LCD.
Connect a stabilizing capacitor between
the VDB pin and GND (0.1 µF, 10 µF
typ.), and between the VLCD pin and
GND (0.1 µF typ.). Connect a voltage
doubler boosting capacitor (0.1 µF typ.)
between C1 and C2, and between C3
and C4. (Note)
VLCD
Note: When the LCD pin is set as an output port, the “H” level output is the doubled voltage VLCD. Therefore
disconnect the voltage boosting capacitor and connect the VLCD pin to the VDD pin.
10
2006-03-02
Share Link: 