MAX78615+LMU Data Sheet
On-Chip Resources Overview
The MAX78615+LMU device, when connected with an isolated MAX78700, integrates all the hardware blocks
required for accurate AC power and energy measurement. Included in the MAX78615 are:
• Oscillator circuits and clock management logic
• Power-on reset, watchdog timer, and reset circuitry
• 24-bit energy measurement processor (EMP) with RAM and flash memory
• Serial UART, SPI, I2C interfaces and multipurpose digital I/O
• Pulse Transformer Interface (for connection to one or more MAX78700)
Block Diagram
The following is a block diagram of the hardware resources available on the MAX78615+LMU.
VCC
GND
XIN
XOUT
RESET
PULSE TRANSFORMER INTERFACES
PULSE TRANSFORMER CONTROL
2.5V
REG
XTAL
OSC
RC
OSC
CLK CLK
SEL GEN
EMP
SPI
I2C
IO
MUX
UART
TIMERS
WATCHDOG
INFO.
BLOCK
FLASH
4Kx16
PROGRAM
MEMORY
RAM
512x24
Figure 4. Block Diagram
IFC0
MP0 / IFC1
SPCK / ADRR0
SDI / RX / SDAi
SDO / TX / SDAo
MP4
SSB / DIR / SCL
MP6 / ADDR1
MP7
COMP1
COMP2
Rev 0
11