LM3201921 데이터 시트보기 (PDF) - Sharp Electronics

부품명

상세내역

제조사

LM3201921

DEVICE SPECIFICATION for Passive Matrix LCD Module

Sharp Electronics 

SHARP

SPEC No.

LC99204

nY)DEL No.

LM3201921

PAGE

2

9) Avoid to expose the module to the direct sun-light, strong ultraviolet

light, etc.

I

for a long time.

10) If stored at temperatures below specified storage temperature, the LC may freeze

and be deteriorated.

If storage temperatures exceed the specified rating, the

molecular orientation of the LC may change to that of a liquid, and they may not

revert to their original state.

11) Disassembling the LCD module can cause permanent damage and should be strictly

avoided.

12) Don't use any materials that emit gas from epoxy resin (amines'herdener)

and

silicone adhesive agent (dealcohol or deoxym) to prevent change polarizer color owing

I

to gas.

13)Since leakage current, which may ba caused by routing of CCFT cables, etc., may

affect the brightness of display, the inverter has to be designed taking the leakage

current into consideration.

Thorough evaluation of the LCD module/inverter

built into

its hots equipment shall be conducted, therefore, to ensure the specified brightness.

l4)This specification

describes display quality in case of no gray scale. Since

display quality can be affected by gray scale methods, display quality shall be

carefully evaluated for the usability

on the LCDmodule.

of LCD module in case gray scale is displayed

Share Link: