AT88SC0104C-Y4I 데이터 시트보기 (PDF) - Atmel Corporation

부품명

상세내역

제조사

AT88SC0104C-Y4I

CryptoMemory 1 Kbit

Atmel Corporation 

Description

The AT88SC0104C member of the CryptoMemory® family is a high-performance secure

memory providing 1 Kbit of user memory with advanced security and cryptographic fea-

tures built in. The user memory is divided into four 32-byte zones, each of which may be

individually set with different security access rights or combined together to provide

space for 1 to 4 data files.

Smart Card Applications

The AT88SC0104C provides high security, low cost, and ease of implementation with-

out the need for a microprocessor operating system. The embedded cryptographic

engine provides for dynamic, symmetric-mutual authentication between the device and

host, as well as performing stream encryption for all data and passwords exchanged

between the device and host. Up to four unique key sets may be used for these opera-

tions. The AT88SC0104C offers the ability to communicate with virtually any smart card

reader using the asynchronous T = 0 protocol (Gemplus Patent) defined in ISO 7816-3.

Embedded Applications

Through dynamic, symmetric-mutual authentication, data encryption, and the use of

encrypted checksums, the AT88SC0104C provides a secure place for storage of sensi-

tive information within a system. With its tamper detection circuits, this information

remains safe even under attack. A 2-wire serial interface running at 1.5 MHz is used for

fast and efficient communications with up to 15 devices that may be individually

addressed. The AT88SC0104C is available in industry standard 8-lead packages with

the same familiar pinout as 2-wire serial EEPROMs.

Figure 1. Block Diagram

VCC

GND

Power

Management

Authentication,

Encryption and

Certification Unit

Random

Generator

SCL/CLK

SDA/IO

Synchronous

Interface

Asynchronous

ISO Interface

Data Transfer

Password

Verification

EEPROM

RST

Reset Block

Answer to Reset

Pin Descriptions

Supply Voltage (VCC)

Clock (SCL/CLK)

Reset (RST)

The VCC input is a 2.7V to 5.5V positive voltage supplied by the host.

In the asynchronous T = 0 protocol, the SCL/CLK input is used to provide the device

with a carrier frequency f. The nominal length of one bit emitted on I/O is defined as an

“elementary time unit” (ETU) and is equal to 372/f. When the synchronous protocol is

used, the SCL/CLK input is used to positive edge clock data into the device and nega-

tive edge clock data out of the device.

The AT88SC0104C provides an ISO 7816-3 compliant asynchronous answer to reset

sequence. When the reset sequence is activated, the device will output the data pro-

2 AT88SC0104C

2021GS–SMEM–7/06

Share Link: