D8740180GTH 데이터 시트보기 (PDF) - RF Micro Devices
부품명
상세내역
제조사
D8740180GTH Datasheet PDF : 3 Pages
| |||
D8740180GTH
Nominal Operating Parameters
Parameter
Specification
Unit
Min Typ Max
Condition
General Performance
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
Power Gain
Slope[1]
18.5
20.0 dB f = 870MHz
0.6 1.0 1.4 dB f = 40MHz to 870MHz
Flatness of Frequency Response
0.6 dB f = 40MHz to 870MHz (Peak to Valley)
20.0
dB f = 40MHz to 320MHz
Input Return Loss
19.0
dB f = 320MHz to 640MHz
17.0
dB f = 640MHz to 870MHz
20.0
dB f = 40MHz to 320MHz
Output Return Loss
19.0
dB f = 320MHz to 640MHz
18.0
dB f = 640MHz to 870MHz
Noise Figure
6.5 dB f = 50MHz to 870MHz
Total Current Consumption (DC)
420.0 440.0 mA
Distortion Data 40MHz to 870MHz
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
-68
-66 dBc 79 ch. flat; V0 = 48dBmV[2]
-62
-60 dBc 112 ch. flat; V0 = 48dBmV[3]
CTB
-58
-56 dBc 132 ch. flat; V0 = 48dBmV[4]
-66
-64 dBc 79 ch. 7dB tilted; V0 = 53dBmV at 550MHz[5]
-60
-58 dBc 112 ch. 10dB tilted; V0 = 54dBmV at 750MHz[6]
-62
-60 dBc 79 ch. flat; V0 = 48dBmV[2]
-59
-57 dBc 112 ch. flat; V0 = 48dBmV[3]
XMOD
-57
-55 dBc 132 ch. flat; V0 = 48dBmV[4]
-60
-58 dBc 79 ch. 7dB tilted; V0 = 53dBmV at 550MHz[5]
-53
-51 dBc 112 ch. 10dB tilted; V0 = 54dBmV at 750MHz[6]
-70
-68 dBc 79 ch. flat; V0 = 48dBmV[2]
-66
-64 dBc 112 ch. flat; V0 = 48dBmV[3]
CSO
-64
-62 dBc 132 ch. flat; V0 = 48dBmV[4]
-69
-67 dBc 79 ch. 7dB tilted; V0 = 53dBmV at 550MHz[5]
-65
-63 dBc 112 ch. 10dB tilted; V0 = 54dBmV at 750MHz[6]
1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.
2. 79 channels, NTSC frequency raster: 55.25MHz to 547.25MHz, +48dBmV flat output level.
3. 112 channels, NTSC frequency raster: 55.25MHz to 745.25MHz, +48dBmV flat output level.
4. 132 channels, NTSC frequency raster: 55.25MHz to 865.25MHz, +48dBmV flat output level.
5. 79 channels, NTSC frequency raster: 55.25MHz to 547.25MHz, +46dBmV to +53dBmV tilted output level.
6. 112 channels, NTSC frequency raster: 55.25MHz to 745.25MHz, +44dBmV to +54dBmV tilted output level.
Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA. Composite Triple Beat (CTB) - The CTB
parameter is defined by the NCTA. Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to
100% modulation of the carrier being tested.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140109
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 3
Share Link: 