DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

M52743BSP 데이터 시트보기 (PDF) - Renesas Electronics

부품명
상세내역
제조사
M52743BSP Datasheet PDF : 26 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
M52743BSP
VthCP Clamp Pulse Threshold Voltage
Turn down the SG5 input level gradually from 5.0 VP-P, monitoring the waveform output.
Measure the top level of input pulse when the output pedestal voltage turn decrease with unstable.
WCP Clamp Pulse Minimum Width
Decrease the SG5 pulse width gradually from 0.5 µs, monitoring the output. Measure the SG5 pulse width (a point of
1.5 V) when the output pedestal voltage turn decrease with unstable.
PDCH Pedestal Voltage Temperature Characteristics1
Measure the pedestal voltage at 25°C. The measured value is called PDC1.
Measure the pedestal voltage at temperature of 20°C.
The measured value is called PDC2.
Pedestal voltage temperature characteristics 1 is calculated by the equation below:
PDCH = PDC1 PDC2
PDCL Pedestal Voltage Temperature Characteristics2
Measure the pedestal voltage at 25°C. The measured value is called PDC1.
Measure the pedestal voltage at temperature of 75°C.
The measured value is called PDC3.
Pedestal voltage temperature characteristics 2 is calculated by the equation below:
PDCL = PDC1 PDC3
OTr OSD Pulse Characteristics1
Measure the time needed for the output pulse to rise from 10% to 90% (OTr) with an active probe.
OTf OSD Pulse Characteristics2
Measure the time needed for the output pulse to fall from 90% to 10% (OTf) with an active probe.
Oaj1 OSD Adjust Control Characteristics1
Measure the amplitude output at OUT (29, 32, 35). The measured value is called VOUT (29, 32, 35), and is treated as
Oaj1.
Oaj1 OSD Adjust Control Relative Characteristics1
Relative characteristics Oaj1 is calculated by the equation below:
Oaj1 = VOUT (29) / VOUT (32),
VOUT (32) / VOUT (35),
VOUT (35) / VOUT (29)
Oaj2 OSD Adjust Control Characteristics2
Measuring condition and procedure are the same as described in Oaj1.
Oaj2 OSD Adjust Control Relative Characteristics2
Measuring condition and procedure are the same as described in Oaj1.
REJ03F0193-0201 Rev.2.01 Mar 31, 2008
Page 12 of 25

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]