LM555CN_13 데이터 시트보기 (PDF) - Fairchild Semiconductor

부품명

상세내역

제조사

LM555CN_13

Single Timer

Fairchild Semiconductor 

In Figure 14, current source is created by PNP transistor Q1 and resistor R1, R2, and RE.

IC

=

-V----C----C------–-----V----E--

RE

(12)

Here, VE is

VE = VBE + R-----1---R--+--2---R----2-- VCC

(13)

For example, if VCC = 15 V, RE = 20 kΩ, R1 = 5 kΩ, R2 = 10 kΩ, and VBE = 0.7 V,

VE=0.7 V+10 V=10.7 V, and

IC=(15-10.7) / 20 k=0.215 mA.

When the trigger starts in a timer configured as shown in Figure 14, the current flowing through capacitor C1 becomes

a constant current generated by PNP transistor and resistors.

Hence, the VC is a linear ramp function as shown in Figure 15. The gradient S of the linear ramp function is defined as

follows:

S = V-----p-----–----p--

(14)

t

Here the Vp-p is the peak-to-peak voltage.

If the electric charge amount accumulated in the capacitor is divided by the capacitance, the VC comes out as follows:

V = Q/C

(15)

The above equation divided on both sides by t gives:

V--- = Q-------§-----t-

(16)

tC

and may be simplified into the following equation:

S = I/C

(17)

In other words, the gradient of the linear ramp function appearing across the capacitor can be obtained by using the

constant current flowing through the capacitor.

If the constant current flow through the capacitor is 0.215 mA and the capacitance is 0.02 μF, the gradient of the ramp

function at both ends of the capacitor is S = 0.215 m / 0.022 μ = 9.77 V/ms.

© 2002 Fairchild Semiconductor Corporation

LM555 Rev. 1.1.0

10

www.fairchildsemi.com

Share Link: