MP5007 – 5V, 1A- 5A PROGRAMMABLE CURRENT LIMIT SWITCH
PCB Layout
PCB layout is very important to achieve stable
operation. Please follow these guidelines and
take below figure for reference.
Place Rlimit close to I_limit pin, Cdv/dt close to
dv/dt pin and input cap close to Vcc. Keep the
N/C pin float. Put vias in thermal pad and ensure
enough copper area near Vcc and source to
achieve better thermal performance.
GND
RLIMIT
N/C 6
EN/ FAULT
I_LIMIT 7
EN/ FAULT 8
dv/dt 9
GND 10
VCC
C3
5 SOURCE
4 SOURCE
3 SOURCE
2 SOURCE
1 SOURCE
VIN
VOUT
VIN
Top Layer
Figure3 — PCB Layout
Bottom Layer
MP5007 Rev.1.1
www.MonolithicPower.com
10
9/2/2014
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.