M600 데이터 시트보기 (PDF) - XP Power Limited

부품명

상세내역

제조사

M600

Rack & Cabinet Mount Switchers

XP Power Limited 

19” Subracks & Redundant Systems

Front View

Rear View

Description

In addition to a complete range of individual power

supplies we are able to offer a ‘total

solution’ to your power requirements.

Subracks can be configured as 3U, 6U or 9U and

multiples thereof, allowing any mix of units

including ‘hot swap’ redundant systems.

The wide range of options available include input

fuses, circuit breakers, decoupling diodes, RFI

filters, front panels and full system wiring.

Outputs are via DIN rail screw terminals and are

configure to customers requirements to

incorporate DC OK relay contacts, input and

output connections and any other options.

Please contact the sales office for a quotation.

Sample Schematic

Example

The photographs show a typical system containing

a C694-DD.DR which could be configured with

similar units in an N + 1 redundant system.

Specification typically could be:

AC Input: 185-264 V

DC Output: 24 V @ 40 A N + 1 redundancy

Each unit is rated at 20 Amps and is connected in

parallel via decoupling diodes and set up to

current share. In the event of a psu failure the DC

OK alarm relay trips, the failed psu can be

identified by its front panel LED and the psu

replaced without power shut down ie. ‘Hot Swap’.

A full system schematic is provided with each

system as shown below, the size and orientation of

connectors can be specified by the customer.

Standard Options

See Over for Integral PSU Options

3U subrack, 215 or 275 mm deep

6U subrack, 215 or 275 mm deep

6U subrack, configured as 2 x 3U

9U subrack, configured as 3 x 3U

9U subrack, configured as 1 x 3U, 1 x 6U

H15 mating connectors and wiring

DIN rail terminal strip at rear

Input Fuse

up to 25 A

up to 63 A

MCB, single pole

up to 25 A

up to 40 A

up to 63 A

MCB, dual pole

up to 25 A

up to 40 A

up to 63 A

Decoupling Diodes on Heatsink 2 x 50 A

2 x 80 A

The above demonstrates a typical schematic as supplied with each

system. It shows 2 x 2 C694-DD.DR connected in parallel

incorporating option DD (Decoupling Diodes) and DR (DC-OK Relay).

RFI filter, 20-40 dB reduction

up to 10 A

up to 20 A

Front panels, plain or drilled all sizes

Tel: +33 (0)820 801 401 F

Tel: +41 (0)56 483 34 00 CH

Share Link: