ESD7016, SZESD7016
Low Capacitance ESD
Protection USB3.0
The ESD7016 transient voltage suppressor is specifically designed
to protect USB3.0 interfaces by integrating two Superspeed pairs, D+,
D−, and Vbus lines into a single protection product. Ultra−low
capacitance and low ESD clamping voltage make this device an ideal
solution for protecting voltage sensitive high speed data lines. The
flow−through style package allows for easy PCB layout and matched
trace lengths necessary to maintain consistent impedance between
high speed differential lines.
Features
• Low Capacitance (0.15 pF Typical, I/O to GND)
• Protection for the Following IEC Standards:
IEC 61000−4−2 (Level 4)
• Low ESD Clamping Voltage
• SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
• This is a Pb−Free Device
Typical Applications
• USB 3.0
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Operating Junction Temperature Range
TJ
−55 to +125 °C
Storage Temperature Range
Tstg
−55 to +150 °C
Lead Solder Temperature −
Maximum (10 Seconds)
TL
260
°C
IEC 61000−4−2 Contact (ESD)
IEC 61000−4−2 Air (ESD)
ESD
ESD
±15
kV
±15
kV
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
http://onsemi.com
MARKING
DIAGRAM
UDFN8
CASE 517CB
1
6M MG
G
6M = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
PIN CONFIGURATION
AND SCHEMATIC
I/O 1
I/O 2
N/C
Vbus or Ground
I/O 3
I/O 4
N/C
I/O 5
I/O 6
ORDERING INFORMATION
Device
Package
Shipping
ESD7016MUTAG
UDFN8 3000 / Tape &
(Pb−Free)
Reel
SZESD7016MUTAG UDFN8 3000 / Tape &
(Pb−Free)
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2013
1
May, 2013 − Rev. 3
Publication Order Number:
ESD7016/D