AZ766 데이터 시트보기 (PDF) - American Zettler, Inc.
부품명
상세내역
제조사
AZ766 Datasheet PDF : 2 Pages
| |||
AZ766
SPST SUBMINIATURE
POWER RELAY
FEATURES
• Small footprint
• Low seated height
• Low cost
• Epoxy sealed version available
• 13.5 Amp switching
• UL Class B insulation system
• UL, CUR file E44211
CONTACTS
Arrangement
Ratings
Rated Load
UL, CUR
Material
Resistance
SPST (1 Form A)
Resistive load:
Max. switched power: 300 W or 2770 VA
Max. switched current: 13.5 A
Max. switched voltage: 150* VDC or 400 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
13.5 A at 125 VAC
12 A at 125 VAC Gen. use 100 K cycles
10 A at 277 VAC / 30 VDC 100 K cycles
TV–5
1/4 HP, 125 VAC / 250 VAC
Silver tin oxide
< 50 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
253 mW
1.3 W at 20°C (68°F) ambient
39°C (70°F) at nominal coil voltage
Max. 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 12 A 125 VAC Res.
Operate Time (typical) 8 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (188°F)
Storage
-40°C (-40°F) to 130°C (266°F)
Vibration
0.040" DA at 10–50 Hz
Shock
10 g operating, 100 g damage
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
6 grams
03/23/04W
Share Link: 