MC-4516CA727 데이터 시트보기 (PDF) - NEC => Renesas Technology
부품명
상세내역
제조사
MC-4516CA727
NEC => Renesas Technology
MC-4516CA727 Datasheet PDF : 16 Pages
| |||
MC-4516CA727
DC Characteristics (Recommended Operating Conditions Unless Otherwise Noted)
Parameter
5 Operating current
Symbol
ICC1 Burst length = 1
Test condition
MIN. MAX. Unit Notes
/CAS latency = 2
900 mA 1
tRC ≥ tRC(MIN.), IO = 0 mA
/CAS latency = 3
945
Precharge standby current in
ICC2P CKE ≤ VIL(MAX.), tCK = 15 ns
9 mA
5 power down mode
ICC2PS CKE ≤ VIL(MAX.), tCK = ∞
9
Precharge standby current in ICC2N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),
non power down mode
Input signals are changed one time during 30 ns.
180 mA
ICC2NS CKE ≥ VIH(MIN.), tCK = ∞
72
Input signals are stable.
Active standby current in
ICC3P CKE ≤ VIL(MAX.), tCK = 15 ns
45 mA
power down mode
ICC3PS CKE ≤ VIL(MAX.), tCK = ∞
36
Active standby current in
ICC3N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),
270 mA
non power down mode
Input signals are changed one time during 30 ns.
ICC3NS CKE ≥ VIH(MIN.), tCK = ∞, Input signals are stable.
180
5 Operating current (Burst mode) ICC4 tCK ≥ tCK(MIN.), IO = 0 mA
/CAS latency = 2
1,080 mA 2
5 CBR (Auto) refresh current
ICC5 tRC ≥ tRC(MIN.)
/CAS latency = 3
/CAS latency = 2
1,395
2,070 mA 3
5
/CAS latency = 3
2,160
Self refresh current
ICC6 CKE ≤ 0.2 V
18 mA
Input leakage current
II(L) VI = 0 to 3.6 V, All other pins not under test = 0 V
– 9 + 9 µA
Output leakage current
IO(L) DOUT is disabled, VO = 0 to 3.6 V
– 1.5 + 1.5 µA
High level output voltage
VOH IO = – 4 mA
2.4
V
Low level output voltage
VOL IO = + 4 mA
0.4 V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).
2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).
3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).
6
Data Sheet M14409EJ2V0DS00
Share Link: