OP555C 데이터 시트보기 (PDF) - TT Electronics.
부품명
상세내역
제조사
OP555C Datasheet PDF : 6 Pages
| |||
OP550, OP552, OP555, OP560, OP565,
OP750 Series
OP552
Features:
Wide receiving angle
Four sensitivity ranges
Side-looking package
Ideal for space-limited applications
Ideal for PCBoard mounting
Choice of clear, opaque or blue-tinted package
OP550
OP560
OP750
OP770
OP555
OP565
Description:
OP550, OP552, OP555, OP750, and OP770 series consists of a NPN silicon phototransistor molded in an epoxy package with
a wide receiving angle that provides relatively even reception over a large area. The OP750 and OP770 have additional
circuitry to enhance the operation of the device for stray light levels.
OP560 and OP565 series consists of a NPN silicon photodarlington transistor molded in an epoxy package with a wide
receiving angle that provides relatively even reception over a large area.
The side-looking package design allows easy PCBoard mounting of slotted optical switches or optical interrupt detectors.
The OP550, OP560, OP750 and OP770 devices have an external lens in a clear epoxy package.
The OP552 device has an integral lens in an opaque plastic package that is optically transparent to infrared light but opaque
to visible wavelengths. This feature allows the device to be used under high ambient light conditions – or anywhere
external light sources could interfere with the intended sensing application (visible light immunity).
The OP555 and OP565 devices have an internal lens in a blue-tinted package. The lensing effect of this package allows an
acceptance half-angle of 28° when measured from the optical axis to the half-power point.
These devices are 100% production tested using infrared light for close correlation with OPTEK’s GaAs and GaAIAs emitters.
All of these sensors are mechanically and spectrally matched to the OP140, OP142, OP145, OP240 and OP245 series of
infrared emitting diodes.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data.
For custom versions please contact your OPTEK representative.
Applications:
Applications requiring
wide receiving angle
Applications requiring
PCBoard mounting
Space-limited applications
Optical switches
Optical interrupt detectors
Optical encoders
Non-contact position
sensing
Machine automation
OP __ __ __ __
55 = Phototransistor
56 = Photodarlington
75 = Phototransistor with RBE
77 = Phototransistor with CCE
A = Highest sensitivity level
B = Sensitivity Level with Min. Max.
C = Middle Sensitivity Level
D = Lowest Sensitivity Level
0 = Extended Lens - Clear Package
2 = Extended Lens - Blue Tinted Package
5 = Integral Lens - Blue Tinted Package
OP550A
OP550B
OP550C
OP550D
OP552A
OP552B
OP552C
OP552D
OP555A
OP555B
OP555C
OP555D
Available Part Numbers
OP560A OP565A OP750A
OP560B OP565B OP750B
OP560C OP565C OP750C
OP750D
OP755A
OP755B
OP755C
OP755D
OP770A
OP770B
OP770C
OP770D
OP775A
OP775B
OP775C
OP775D
RoHS
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
Issue A 08/2016 Page 1
Share Link: 