RF3165 데이터 시트보기 (PDF) - RF Micro Devices
부품명
상세내역
제조사
RF3165 Datasheet PDF : 6 Pages
| |||
RF3165
Pin Function Description
Interface Schematic
1
RF IN
RF input internally matched to 50Ω. This input is internally AC-coupled.
2
GND
Ground connection.
3
VMODE
For nominal operation (High Power mode), VMODE is set LOW. When set
HIGH, devices are biased lower to improve efficiency at lower output levels.
4
VREG
Regulated voltage supply for amplifier bias circuit. In power down mode,
both VREG and VMODE need to be LOW (<0.5V).
5
NC
No connection. Do not connect this pin to any external circuit.
6
NC
No connection. Do not connect this pin to any external circuit.
7
NC
No connection. Do not connect this pin to any external circuit.
8
NC
No connection. Do not connect this pin to any external circuit.
9
RF OUT
RF output. Internally AC-coupled.
10
VCC2
Output stage collector supply. Connect to pin 11 with the shortest trace
possible. Please see the schematic for required external components. See
note.
11
VCC2
Output stage collector supply and output matching. Connect to pin 10 and
pin 12 with the shortest trace possible. See note.
12
VCC2
Output stage collector supply and output matching. Connect to pin 11 with
the shortest trace possible. See note.
13
NC
No connection. Do not connect this pin to any external circuit.
14
IM
Interstage matching. Connect to pin 15 with the shortest trace possible.
See note.
15
VCC1/IM First stage collector supply and interstage matching. A 4.7μF decoupling
capacitor may be required. Connect to pin 14 with the shortest trace possi-
ble. See note.
16
VCCBIAS Power supply input for the DC bias circuitry.
Pkg
Base
GND
Ground connection. The backside of the package should be soldered to a
top side ground pad which is connected to the ground plane with multiple
vias. The pad should have a short thermal path to the ground plane.
Note: Refer to Layout Recommendation Application Note and Application Schematic for additional information.
Pin 1 ID
Package Drawing
3.00
1.45
A
Pin 1 ID
3.00
1.45
0.15 C
2 PLCS
0.15 C
2 PLCS
B
0.203 REF
00..4200TYP
0.10 M C A B
0.08 C
0.925
0.775
0.102 REF
C
Shaded areas represent pin 1. Dimensions in mm.
00..2188TYP
0.05
0.50 TYP
0.08 C
4 of 6
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
Rev A7 DS061201
Share Link: 