STM6321 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

STM6321

5-pin supervisor with watchdog timer and push-button reset

STMicroelectronics 

Operation

2

Operation

STM632x, STM682x

2.1

Reset output

The STM6xxx supervisor asserts a reset signal to the MCU whenever VCC goes below the

reset threshold (VRST), a watchdog timeout occurs, or when the push-button reset input

(MR) is taken low. Reset is guaranteed valid for VCC < VRST down to VCC =1 V for

TA = 0 to 85 °C.

During power-up, once VCC exceeds the reset threshold an internal timer keeps reset low

for the reset timeout period, trec. After this interval reset is de-asserted.

Each time RST is asserted, it stays low for at least the reset timeout period (trec). Any time

VCC goes below the reset threshold the internal timer clears. The reset timer starts when

VCC returns above the reset threshold.

2.2

Open drain RST output

The STM6321/6322/6822 have an active low, open drain reset output. This output structure

will sink current when RST is asserted. Connect a pull-up resistor from RST to any supply

voltage up to 6 V (see Figure 11). Select a resistor value large enough to register a logic low,

and small enough to register a logic high while supplying all input current and leakage paths

connected to the reset output line. A 10 kΩ pull-up resistor is sufficient in most applications.

Figure 11. STM6321/6322/6822 open drain RST output with multiple supplies

9

9

9&&

670;;;

05

:',

567

567

*1'

9V\VWHP

1. STM6322/6822.

2. STM6321/6822.

3. STM6321/6322.

$,9

10/31

DocID11110 Rev 13

Share Link: