GHA500F-15-T3 PDF VIEW DOWNLOAD, GHA500F-15-T3 데이터시트

GHA500F-15-T3 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

제조사

GHA500F-15-T3

AC-DC Power Supplies Medical type

Unspecified

GHA500F-15-T3 Datasheet PDF : 4 Pages

1 2 3 4

AC-DC Power Supplies Medical type

GHA500F

Ordering information

GH A 500 F

-OO -O

Recommended EMI/EMC Filter

EAC-10-472

Information the Home page is the latest.

Photo is an image of the appearance.

May differ from the actual product.

High voltage pulse noise type : EAP series

Low leakage current type : EAM series

*The EMI/EMC Filter is recommended to

connect with several devices.

【Cautions】

・Forced air cooling is required for the maximum output power. Please see instruction manual.

・Avoid applying stress to surface mount components.

・De-rating is required if the applied input voltage is 90-115VAC.

・The electrolytic capacitor has limited life span which is very much dependent on the actual operating conditions.

・Operating in the presense of chemical vapors or harsh environmnet can affect the power supply life expectnacy.

・Please make sure to read the instruction manual carefully before using this product.

It should be in the "Instruction Manual" not spec sheet.

MODEL

MAX OUTPUT WATTAGE[W]

Forced air at 50C

DC OUTPUT

Convection

at 40C

at 50C

conduction at 0C

cooling at 50C

GHA500F-12

500.8

12V 41.7A

12V 12.5A

12V 9.2A

12V 30.0A

12V 16.7A

GHA500F-15

501

15V 33.4A

15V 10.0A

15V 7.4A

15V 24.0A

15V 13.4A

GHA500F-24

504

24V 21.0A

24V 6.3A

24V 4.6A

24V 15.0A

24V 8.4A

1Series name

2Single output

3Output wattage

4Universal input

5Output voltage

6 Optional *6

T3 : mounting hole M3

J1 : VH(J.S.T.)connector type

R3 : with Subfeatures

(5VAUX,12VAUX,Remote,

Power good)

P : Pallarel Operation

Specification is changed at

option, refer to Instruction

manual.

GHA500F-48

504

48V 10.5A

48V 3.2A

48V 2.3A

48V 7.5A

48V 4.2A

SPECIFICATIONS

GHA

MODEL

GHA500F-12

GHA500F-15

GHA500F-24

GHA500F-48

VOLTAGE[V]

AC90 - 264 1f (output derating is required at AC90V -115V *3)

CURRENT[A]

ACIN 120V 5.4typ

ACIN 230V 2.9typ

FREQUENCY[Hz]

50 / 60 (47 - 63)

INPUT

EFFICIENCY[%]

ACIN 120V 88typ

ACIN 230V 90typ

90typ

92typ

90typ

92typ

90typ

92typ

POWER FACTOR ACIN 120V 0.95typ

(Io=100%) ACIN 230V 0.90typ

INRUSH CURRENT[A]

ACIN 120V

ACIN 230V

20typ (Io=100%) (At cold start) (Ta=25C)

40typ (Io=100%) (At cold start) (Ta=25C)

LEAKAGE CURRENT[mA] 0.125/0.250max (ACIN 120V/240V 60Hz,Io=100%, According to IEC60601-1)

VOLTAGE[V]

Forced air 41.7

33.4

21.0

10.5

CURRENT[A]

Convection 9.2

7.4

4.6

2.3

conduction cooling 16.7

13.4

8.4

4.2

LINE REGULATION[mV] *4 48max

60max

96max

192max

LOAD REGULATION[mV] *4 100max

RIPPLE[mVp-p]

0 to +50C 240max

-20 - 0C 320max

120max

240max

320max

150max

240max

320max

240max

300max

400max

OUTPUT

RIPPLE NOISE[mVp-p]*1

0 to +50C 300max

-20 - 0C 360max

TEMPERATURE REGULATION[mV]

0 to +50C 120max

-20 to +50C 150max

300max

360max

120max

150max

300max

360max

240max

290max

480max

500max

480max

600max

DRIFT[mV]

*2 48max

60max

96max

192max

START-UP TIME[ms]

500typ (ACIN 120V, Io=100%)

HOLD-UP TIME[ms]

16typ (ACIN 120V, Io=100%)

OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 10.80 to 13.20

13.50 to 16.50

21.60 to 26.40

43.20 to 52.80

OUTPUT VOLTAGE SETTING[V] 12.00 to 12.48

15.00 to 15.30

24.00 to 24.96

48.00 to 49.92

OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically

PROTECTION

CIRCUIT AND

OTHERS

OVERVOLTAGE PROTECTION[V]

AUX1 (12V1A)

AUX2 (5V1A)

REMOTE ON/OFF

13.80 to 16.80

Optional

17.25 to 21.00

27.60 to 33.60

55.20 to 67.20

PowerGood

Optional

INPUT-OUTPUT-RC-AUX *7 AC4,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)

ISOLATION

INPUT-FG

OUTPUT-RC-AUX-FG

AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)

*7 AC500V 1minute, Cutoff current = 25mA, DC500V 50MW min (At Room Temperature)

OUTPUT-RC-AUX

*7 AC500V 1minute, Cutoff current = 25mA, DC500V 50MW min (At Room Temperature)

OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +80C, 20 - 90%RH (Non condensing)

ENVIRONMENT

STORAGE TEMP.,HUMID.AND ALTITUDE

VIBRATION

-30 to +80C, 20 - 90%RH (Non condensing)

10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis

IMPACT

196.1m/s2 (20G), 11ms, once each X, Y and Z axis

SAFETY AND AGENCY APPROVALS

UL60950-1, ANSI/AMII ES60601-1, C-UL, EN60950-1, EN60601-1

NOISE

CONDUCTED NOISE

Complies with FCC-B, VCCI-B, CISPR11-B, CISPR22-B, EN55011-B, EN55022-B

REGULATIONS HARMONIC ATTENUATOR

OTHERS

CASE SIZE/WEIGHT

COOLING METHOD

Complies with IEC61000-3-2 (class A) *5

76.2X35X127mm [3.0X1.4X5.0 inches] (WXHXD) / 420g max

Convection, Forced air (Require external fan), Conduction cooling

*1 This is the value that measured on measuring board with capacitor of 22mF at 150mm from

output terminal.

Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM103).

*2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with

the input voltage held constant at the rated input/output.

*3 Derating is required.

*4 Please contact us about dynamic load and input response.

GHA-4

*5 Please contact us about another class.

*6 Specification is changed at option, refer to Instruction Manual.

*7 Applicable when AUX and remote control (optional) is added.

* To meet the specifications. Do not operate over-loaded condition.

* Sound noise may be generated by power supply in case of pulse load.

* Parallel operation is not possible.

Share Link: