Continued from preceding page.
Pin No.
Pin
LA75676V-S
Function
Bandpass filter output
22
BPF-out
The output to the external bandpass filter is passed
through an internal 6 dB amplifier before being output.
Equivalent circuit
200Ω
22
A13282
Filter that holds the FM detector output DC voltage
fixed.
Normally, a 1 µF electrolytic capacitor is used. If the
23
FM filter
low band (around 50 Hz) frequency characteristics are
of concern, this value should be increased. The FM
detection output level can be reduced and the FM
dynamic range improved by inserting the resistor R in
series with the capacitor between pin 23 and ground.
1kΩ 1kΩ
23
R
C
+
A13283
Audio FM detector output
This is an emitter-follower circuit with a 300 Ω resistor
inserted in series.
• Stereo applications
In some application that provide input to a stereo
decoder, the input impedance may be reduced,
24
FM detector output
resulting in distortion in the L-R signal and degraded
stereo characteristics. If this problem occurs, add a
R2
24
300Ω
resistor between pin 24 and ground.
R1 ≥ 5.1 kΩ
C
R1
10kΩ
• Mono applications
Construct an external deemphasis circuit.
t = CR2
A13284
No. 6277-11/13