LC010D 데이터 시트보기 (PDF) - Tyco Electronics

부품명

상세내역

제조사

LC010D

Power Modules: 18 Vdc to 36 Vdc or 36 Vdc to 75 Vdc Inputs, 10 W and 15 W

Tyco Electronics 

LC/LW010- and LC/LW015-Series Power Modules:

18 Vdc to 36 Vdc or 36 Vdc to 75 Vdc Inputs, 10 W and 15 W

Data Sheet

August 1998

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-

lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess

of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended

periods can adversely affect device reliability.

Parameter

Device Symbol Min

Input Voltage:

Continuous

Transient (100 ms)

LC

VI

0

LW

VI

0

LW

VI, trans

0

Operating Case Temperature

All

(See Derating Curves, Figures 43—45.)

TC

–40

Storage Temperature

All

Tstg

–55

I/O Isolation

All

—

—

Typ

Max

Unit

—

50

Vdc

—

80

Vdc

—

100

V

—

105*

°C

—

125

°C

—

1500

Vdc

* Maximum case temperature varies based on power dissipation. See derating curves, Figures 43—45, for details.

Electrical Specifications

Table 1. Input Specifications

Parameter

Device Symbol Min

Typ

Max

Unit

Operating Input Voltage

LC

VI

18

LW

VI

36

Maximum Input Current

LC

II, max

—

(VI = 0 to VI, max; IO = IO, max; see Figures

LW

II, max

—

1—4.)

Inrush Transient

All

I2t

—

Input Reflected-ripple Current

All

II

—

(5 Hz to 20 MHz; 12 µH source imped-

ance; TA = 25 °C; see Figure 33.)

Input Ripple Rejection (100 Hz—120 Hz) All

—

—

24

36

Vdc

48

75

Vdc

—

1.6

A

—

800

mA

—

0.2

A2s

5

—

mAp-p

45

—

dB

Fusing Considerations

CAUTION: This power module is not internally fused. An input line fuse must always be used.

This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone

operation to an integrated part of a sophisticated power architecture. To preserve maximum flexibility, internal fus-

ing is not included; however, to achieve maximum safety and system protection, always use an input line fuse. The

safety agencies require a normal-blow, dc fuse with a maximum rating of 5 A (see Safety Considerations section).

Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same

type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s data for further information.

2

Tyco Electronics Corp.

Share Link: