MC-4516CA727XFA
DC Characteristics (Recommended Operating Conditions Unless Otherwise Noted)
Parameter
Symbol
Test condition
Operating current
ICC1 Burst length = 1
tRC ≥ tRC(MIN.), IO = 0 mA
/CAS latency = 2
/CAS latency = 3
Precharge standby current in
ICC2P CKE ≤ VIL(MAX.), tCK = 15 ns
power down mode
ICC2PS CKE ≤ VIL(MAX.), tCK = ∞
Precharge standby current
in non power down mode
Active standby current in
ICC2N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),
Input signals are changed one time during 30 ns.
ICC2NS CKE ≥ VIH(MIN.), tCK = ∞
Input signals are stable.
ICC3P CKE ≤ VIL(MAX.), tCK = 15 ns
power down mode
ICC3PS CKE ≤ VIL(MAX.), tCK = ∞
Active standby current in
non power down mode
ICC3N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),
Input signals are changed one time during 30 ns.
Operating current (Burst mode)
ICC3NS CKE ≥ VIH(MIN.), tCK = ∞,
Input signals are stable.
ICC4 tCK ≥ tCK(MIN.), IO = 0 mA
/CAS latency = 2
/CAS latency = 3
CBR (Auto) refresh current
ICC5
tRC ≥ tRC(MIN.)
/CAS latency = 2
/CAS latency = 3
Self refresh current
ICC6 CKE ≤ 0.2 V
Input leakage current
II(L) VI = 0 to 3.6 V, All other pins not under test = 0 V
Output leakage current
IO(L) DOUT is disabled, VO = 0 to 3.6 V
High level output voltage
VOH IO = – 4 mA
Low level output voltage
VOL IO = + 4 mA
-A75
MIN. MAX.
900
945
9
9
180
Unit Notes
mA 1
mA
mA
72
45
mA
36
270 mA
180
1,080 mA 2
1,395
2,070 mA 3
2,160
18
mA
–9
+9
µA
– 1.5 + 1.5 µA
2.4
V
0.4
V
Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).
2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In
addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).
3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).
6
Data Sheet E0231N20 (Ver. 2.0)