ADNK-3043-TI27 데이터 시트보기 (PDF) - Avago Technologies

부품명

상세내역

제조사

ADNK-3043-TI27

Wireless USB Optical Mouse Designer’s Kit

Avago Technologies 

Regulatory Requirements

• Passes FCC B and worldwide analogous emission

limits when assembled into a mouse with unshielded

cable and following Avago recommendations.

• Passes EN61000-4-4/IEC801-4 EFT tests when assem-

bled into a mouse with unshielded cable and follow-

ing Avago recommendations.

• UL flammability level UL94 V-0.

• Provides sufficient ESD creepage/clearance distance

to avoid discharge up to 15kV when assembled into a

mouse according to usage instructions above.

• For eye safety consideration, please refer to the docu-

ment, Eye Safety Calculation AN1228 available on the

web site,

http://www.avagotech.com/view/opticalnavigation.

Below is the summary of the components contained in the

ADNK-3034-TI27 Designer’s Kit.

Sensor

The sensor technical information is contained in the ADNS-

3040 Data Sheet.

Other system components

Technical information on the TI MSP430F1222 microcon-

troller is contained in the TI Data Sheet. Please contact

your local TI office for theMSP430 development tools.

These tools will allow the designer to make changes and

recompile the source code; perform In-Circuit Emulation

and debug new code for added features.

Programming support and programmer adaptors for the

MSP430 can be found through TI or through other 3rd party

programming tool companies. For further information on

this product, please contact Texas Instrument.

Cypress Semiconductor provides extensive development

tools for the xxxxx USB controller used in the receiver

dongle.

Lens

The lens technical information is contained in the ADNS-

3120-001 Data Sheet. The flange on the standard ADNS-

3120-001 lens is for ESD protection.

LED Assembly Clip

The information on the assembly clip is contained in the

ADNS-2220-001 Data Sheet.

LED

The LED technical information is contained in the HLMP-

ED80-XX000 Data Sheet and Application Note AN-1228.

Additional application notes regarding Eye Safety Require-

ments are also available at Avago’s website.

Base Plate Feature – IGES File

The IGES file on the CD-ROM provides recommended base

plate molding features to ensure optical alignment. This

includes a typical PCB assembly diagrams recommended

solder fixture in assembly and exploded view, as well as

solder plate. See Appendix C for details.

Reference Design Documentation – Gerber File

The Gerber File presents detailed schematics used in

ADNK-3043-TI27 in PCB layout form. The file for this

reference design can be found in the Hardware Support

files folder in the CD-Rom.

Overall circuit

A schematic of the overall circuit is shown in Appendix A of

this document. Appendix B lists the bill of materials.



Share Link: