MX887P 데이터 시트보기 (PDF) - IXYS CORPORATION

부품명

상세내역

제조사

MX887P

μPower Hall-Effect Switch

IXYS CORPORATION 

INTEGRATED CIRCUITS DIVISION

3.5 Mechanical Dimensions

3.5.1 MX887PHT TSOT23 3-Lead Package

E

2.60 / 3.00

(0.102 / 0.118)

2.80 / 3.00

(0.110 / 0.118)

D

3

0º / 8º

0.10 MIN

(0.004 MIN)

Recommended PCB Land Pattern

E1

1.50 / 1.70

(0.059 / 0.067)

0.37 / 0.47

(0.015 / 0.019)

2.70

(0.106)

1.05

(0.041)

1

2

0.75 / 0.90

(0.030 / 0.035)

0.35 / 0.51

(0.014 / 0.020)

5º NOM

0.70 / 0.80

(0.028 / 0.031)

7º NOM

0.60 REF

(0.0236 REF)

0.25 BSC

(0.0098 BSC)

0.10 / 0.25

(0.004 / 0.010)

0.95

(0.037)

0.60

(0.024)

0.00 / 0.10

(0.000 / 0.004)

1.90 BSC

(0.0748 BSC)

0.95 BSC

(0.037 BSC)

Dimensions

mm MIN / mm MAX

(inches MIN / inches MAX)

Notes: (Unless otherwise specified)

1. Dimension “D” does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, and gate burrs shall not exceed 0.10mm

(0.004 inches) per side.

2. Dimension “E” does not include inter-lead flash or protrusions. Inter-lead flash and protrusions shall not exceed 0.15mm (0.006 inches) per side.

3. Package top may be smaller than package bottom. Dimensions “D” and “E1” are determined at the outermost extreme of the plastic body

excluding mold flash, tie bar burrs, gate burrs, and interlead flash, but including any mismatch between top and bottom of the plastic body.

3.5.2 MX887PHTTR Tape & Reel Packaging

178 DIA.

(7.01 DIA.)

0.25 ± 0.05

(0.001 ± 0.002)

Top Cover

Tape Thickness

0.066 MAX.

(0.003 MAX.)

ø1.5, +0.1, -0

(ø0.059, +0.004, -0)

P=4.0 ± 0.1

(0.157 ± 0.004)

2.0 ± 0.05

(0.079 ± 0.002)

3.5 ± 0.05

(0.138 ± 0.002)

1.75 ± 0.1

(0.069 ± 0.004)

MX887P

Embossed Carrier

BO=3.2 ± 0.1

(0.126 ± 0.004)

K0=1.1 ± 0.1

(0.043 ± 0.004)

P=4.0 ± 0.1

(0.157 ± 0.004)

AO=3.2 ± 0.1

(0.126 ± 0.004)

ø1.1 ± 0.1

(0.043 ± 0.004)

W=8.0 ± 0.2

(0.315 ± 0.008)

Dimensions

mm

(inches)

Embossment

NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2

For additional information please visit www.ixysic.com

IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and

reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses or indemnity are expressed

or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability

whatsoever, and disclaims any express or implied warranty relating to its products, including, but not limited to, the implied warranty of merchantability, fitness for a

particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized, or warranted for use as components in systems intended for surgical implant into

the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical

harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes

to its products at any time without notice.

Specification: DS-MX887P-R01

©Copyright 2012, IXYS Integrated Circuits Division

All rights reserved. Printed in USA.

12/22/2012

6

www.ixysic.com

R01

Share Link: