DS1200DC-3-004 데이터 시트보기 (PDF) - Artesyn Technologies
부품명
상세내역
제조사
DS1200DC-3-004 Datasheet PDF : 4 Pages
| |||
DS1200DC Data Sheet
Logic Control
PS_SEATED (A4)
PWR GOOD (C3)
AC OK (B1)
PS_INHIBIT/PS_KILL (B4)
PS ON (A1)
TTL logic LOW if power supply is seated into system connector. This is a short pin. A logic HIGH if the PSU is removed
Active TTL high when output is within regulation limits.
A low logic level if the input voltage is within allowable limits. A TTL logic HIGH level, and a 5 mS early warning signal
before 12.0 V DC output loss of regulation.
When left open power supply operation will be inhibited. When the power supply is inserted into the system, this pin will
be pull low by the system and turn the power supply on only after all other power supply pins have seated.
The output will be enabled when this signal is pulled low, below 0.8 V outputs disabled when pin is driven high or left
open.
Environmental Specifications
Operating temperature
Storage temperature
Altitude, operating
Electromagnetic susceptibility / Input transients
RoHS & lead free
Humidity
Shock and vibration specifications
MTBF (demonstrated
-10 to 55 °C
-40 to +85 °C
13,000 feet
GR-1089-CORE Issue 4
Compliant
20 - 90% RH, non condensing
Complies with Artesyn standard specifications plus additional NEBS requirement
500 K Hrs at full load, 40 °C
Ordering Information
Model
Number*
DS1200DC-3
Nominal Output
Voltage Set
Point
12.0 V
Set Point
Tolerance
±0.2%
Total
Regulation
±0.5%
DS1200DC-3-001
12.0 V
±0.2%
±0.5%
DS1200DC-3-002
12.0 V
±0.2%
±0.5%
DS1200DC-3-004
12.0 V
±0.2%
±0.5%
* Over current latches off if overcurrent lasts over 1 seconds, otherwise it is auto recovery.
** Derating may apply.
Current
Min
Max
0A
100 A
0A
100 A
0A
100 A
0A
100 A
Output Ripple
P/P
120 mV
120 mV
120 mV
120 mV
Overcurrent
118 A - 147.6 A*
118 A - 147.6 A*
118 A - 147.6 A*
118 A - 147.6 A*
Standby
3.3 V @ 6 A
3.3 V @ 6 A
5.0 V @ 4 A
5.0 V @ 4 A
Air Flow
STD
REV**
STD
REV**
Share Link: 