DS1701K 데이터 시트보기 (PDF) - Maxim Integrated

부품명

상세내역

제조사

DS1701K

1-Wire Thermal Device Evaluation Kit

Maxim Integrated 

DS1701K

INTRODUCTION

The DS1701K evaluation kit makes performance evaluation, software development, and prototyping with

the Dallas 1-Wire thermal devices easy. The evaluation board interfaces to a PC through a DS9123 Serial

Port Adapter and RJ-11 cable connection. The provided CD-ROM contains all related data sheets along

with the evaluation software, which can be run under Windows 95 or newer.

The DS1701K evaluation software gives the user complete control of all functions of the Dallas 1-Wire

thermal devices. Separate control tabs allow the user to view the real-time updates of the temperature at

the desired resolution as well as access to all scratchpad and EEPROM memory locations. The software

incorporates a data-logging feature to monitor a device over time. Additionally the software provides the

ability to select and read various devices on the 1-Wire bus.

SETUP AND INSTALLATION

BOARD CONNECTIONS

Communication to the board can be accomplished by connecting the DS9123 serial port adapter to an

available serial port on a PC. Then connect the RJ-11 interface board to the DS9123 serial port adapter

with the provided 6 conductor cable. Finally, connect the DS1701K board to the RJ-11 interface board.

The DS1701K Software can communicate with the Dallas 1-Wire thermal devices without a power

supply being connected to the RJ-11 interface board. However, temperature readings will not be

performed unless the device is configured in parasite power mode (see device data sheets for information

on parasite power mode.)

SOFTWARE INSTALLATION

To install the DS1701K software, exit all programs currently running and insert the DS1701K software

CD into your computer’s CD-ROM. The user can run SETUP.EXE from the setup directory and the

installation process begins. Follow the prompts to complete the installation. The DS1701K software can

be uninstalled in the Add/Remove Programs tool in the Control Panel. After the installation is complete,

open the DS1701K folder and run DS1701K.EXE or select DS1701K from the program menu. A splash

screen containing information about the evaluation kit appears as the program is being loaded.

The Documentation directory, also located on the CD, contains all relevant data sheets and application

notes on the DS18B20, DS18S20, DS1821, DS1822, DS2436, and DS1701K. They are stored in Adobe

Acrobat format for easy viewing.

2 of 10

Share Link: