MB90F372PMT-G 데이터 시트보기 (PDF) - Fujitsu

부품명

상세내역

제조사

MB90F372PMT-G

16-bit Proprietary Microcontroller

Fujitsu 

MB90370 Series

Parameter

Part number

MB90V370

MB90F372

MB90372

External

interrupt

6 independent channels

Selectable causes

: Rise/fall edge, fall edge, “L” level or “H” level

Key-on wake-up

interrupt

8 independent channels

Causes

: “L” level

8/10-bit A/D

converter

8/10-bit resolution

Conversion time

: 12 channels

: Less than 6.13 S (16 MHz internal clock)

8-bit D/A

converter

8-bit resolution

: 2 channels

LCD controller/driver

Up to 9 SEG x 4 COM

Selectable LCD output or CMOS I/O port

Low-power

consumption

Stop mode / Sleep mode / CPU intermittent operation mode / Watch mode

Process

CMOS

Package

PGA256

LQFP-144 (FPT-144P-M12: 0.4 mm pitch)

Operating voltage

3.0~3.6 V @ 16 MHz *

*: Varies with conditions such as the operating frequency (see Section “ ELECTRICAL CHARACTERISTICS”).

Assurance for the MB90V370 is given only for operation with a tool at power supply voltage of 3.0 V to 3.6 V,

an operating temperature of 0 to +25 C, and an operating frequency of 1 MHz to 16 MHz.

PACKAGE AND CORRESPONDING PRODUCTS

Package

PGA256

FPT-144P-M12

MB90V370

X

MB90F372

X

MB90372

X

: Available

X : Not available

Note: For more information about each package, see Section “ PACKAGE DIMENSIONS”.

DIFFERENCES AMONG PRODUCTS

Memory size

In evaluation with an evaluation product, note the difference between the evaluation product and the product

actually used. The following items must be taken into consideration.

• The MB90V370 does not have an internal ROM, however, operations equivalent to chips with an internal ROM

can be evaluated by using a dedicated development tool, enabling selection of ROM size by settings of the

development tool.

• In the MB90V370, images from FF4000H to FFFFFFH are mapped to bank 00, and FF0000H to FF3FFFH are

mapped to bank FF only. (This setting can be changed by the development tool configuration.)

• In the MB90372/F372, images from FF4000H to FFFFFFH are mapped to bank 00, and FF0000H to FF3FFFH

are mapped to bank FF only.

4

Share Link: