DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

ISL6291-1CR 데이터 시트보기 (PDF) - Renesas Electronics

부품명
상세내역
제조사
ISL6291-1CR
Renesas
Renesas Electronics Renesas
ISL6291-1CR Datasheet PDF : 11 Pages
1 2 3 4 5 6 7 8 9 10
ISL6291
Battery Removal Detection
The ISL6291 assumes that the thermistor is co-packed with
the battery and is removed together with the battery. When
the ISL6291 sees a voltage of 2.1V or higher on the TEMP
pin, it assumes that the battery is removed. When the battery
is removed, the charger stops and indicates a fault signal. A
new charge cycle starts when a battery is inserted again.
Output Capacitor COUT
COUT is typically a 10F Tantalum capacitor if the charger is
required to operate with no battery attached. For embedded
battery applications, there is no requirement for a capacitor if
the battery is placed close enough to the charger output. It is
recommended, however, that the charger have at least a
0.1uF ceramic capacitor at the charger output for decoupling
purposes.
Input Capacitor CIN
CIN is typically a 10F Tantalum capacitor or 1F Ceramic
capacitor.
Stability
The charger is stable with a wide range of external
components, including the typical external components.
© Copyright Intersil Americas LLC 2005. All Rights Reserved.
All trademarks and registered trademarks are the property of their respective owners.
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such
modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are
current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its
subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN9102 Rev 2.00
May 2, 2005
Page 10 of 11

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]