ISL8206MEVAL1Z 데이터 시트보기 (PDF) - Renesas Electronics
부품명
상세내역
제조사
ISL8206MEVAL1Z Datasheet PDF : 19 Pages
| |||
ISL8204M, ISL8206M
Absolute Maximum Ratings
Thermal Information
COMP/EN to PGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PGND - 0.3V to +6V
ISET to PGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PGND - 0.3V to PVCC + 0.3V
PVCC to PGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PGND - 0.3V to +15V
PHASE to PGND (Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -1.2V ~ +30V
VIN to PHASE (Note 4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -1.2V ~ +30V
Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C
Storage Temperature Range, TSTG . . . . . . . . . . . . . . . . . . -55°C to +125°C
ESD Rating
Human Body Model (Tested per JESD22-A114E) . . . . . . . . . . . . . . . . 2kV
Machine Model (Tested per JESD22-A115-A) . . . . . . . . . . . . . . . . . 100V
Charge Device Model (Tested per JESD22-C101C). . . . . . . . . . . . . . . 1kV
Latch Up (Tested per JESD-78B; Class 2, Level A) . . . . . . . . . . . . . . 100mA
Thermal Resistance (Typical)
JA (°C/W) JC (°C/W)
15 Ld QFN (Notes 5, 6) . . . . . . . . . . . . . . . . 13.0
2.0
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see TB493
Recommended Operating Ratings
Input Supply Voltage (VIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +1V to +20V
Output Voltage (VOUT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +0.6V to +6V
PVCC
Fixed Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5V or +12V
Wide Range Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +6.5V to +14.4V
Ambient Temperature Range (TA) . . . . . . . . . . . . . . . . . . . -40°C to +85°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4. VDS (Drain to Source) specification for internal high-side and low-side MOSFET.
5. JA is measured in free air with the component mounted on a high effective thermal conductivity test board (i.e. 4-layer type without thermal vias
– see tech brief TB379) per JEDEC standards except that the top and bottom layers assume solid planes.
6. For JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications TA = +25°C. VIN = 12V, VOUT = 1.5V. CIN = 220µFx1, 10µF/Ceramicx2, COUT = 47µFx8/Ceramic. Boldface limits
apply over the operating temperature range, -40°C to +85°C.
PARAMETER
SYMBOL
CONDITIONS
MIN
MAX
(Note 8) TYP (Note 8) UNITS
INPUT CHARACTERISTICS
Input Supply Bias Current
Input In-rush Current
Input Supply Current
OUTPUT CHARACTERISTICS
IQ(VIN)
IOUT = 0A, VOUT = 1.5V, VIN = 12V, PVCC = 12V
-
13
-
mA
IinRush
IOUT = 0A, VOUT = 1.5V, VIN = 12V, PVCC = 12V
-
140
-
mA
IS(VIN)
IOUT = 6A, VOUT = 1.5V, VIN = 12V, PVCC = 12V
-
0.86
-
A
IOUT = 4A, VOUT = 1.5V, VIN = 12V, PVCC = 12V
-
0.56
-
A
Output Continuous Current Range
IOUT(DC)
VIN = 12V, VOUT = 1.5V
ISL8206M
0
-
6
A
ISL8204M
0
-
4
A
Line Regulation Accuracy
Load Regulation Accuracy
Peak-to-Peak Output Ripple Voltage
VOUT/VIN
VOUT/IOUT
VOUT
VOUT = 1.5V, IOUT = 0A, VIN = 3.3V to 20V,
PVCC = 5V
IOUT = 0A to 6A/4A, VOUT = 1.5V, VIN = 12V,
PVCC = 12V
ISL8206M
IOUT = 6A VOUT = 1.5V, VIN = 12V,
PVCC = 12V
ISL8204M
-
0.1
-
%
-
0.5
-
%
-
8
-
mV
-
7
-
mV
DYNAMIC CHARACTERISTICS
IOUT = 4A VOUT = 1.5V, VIN = 12V,
PVCC = 12V
Voltage Change For Positive Load Step
VOUT-DP IOUT = 0A to 4A. Current slew rate = 2.5A/µs,
-
30
-
mV
VIN = 12V, VOUT = 1.5V, PVCC = 12V
Voltage Change For Negative Load Step
VOUT-DN IOUT = 0A to 4A. Current slew rate = 2.5A/µs,
-
27
-
mV
VIN = 12V, VOUT = 1.5V, PVCC = 12V
FN6999 Rev 4.00
October 28, 2014
Page 5 of 19
Share Link: 