74LVC1G126GV-Q100 데이터 시트보기 (PDF) - Nexperia B.V. All rights reserved
부품명
상세내역
제조사
74LVC1G126GV-Q100 Datasheet PDF : 13 Pages
| |||
74LVC1G126-Q100
Bus buffer/line driver; 3-state
Rev. 3 — 15 March 2019
Product data sheet
1. General description
The 74LVC1G126-Q100 provides one non-inverting buffer/line driver with 3-state output. The
3-state output is controlled by the output enable input (OE). A LOW-level at pin OE causes the
output to assume a high-impedance OFF-state.
The input can be driven from either 3.3 V or 5 V devices. This feature allows the use of this device
in a mixed 3.3 V and 5 V environment.
This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry
disables the output, preventing the damaging backflow current through the device when it is
powered down.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100
(Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
• Automotive product qualification in accordance with AEC-Q100 (Grade 1)
• Specified from -40 °C to +85 °C and from -40 °C to +125 °C
• Wide supply voltage range from 1.65 V to 5.5 V
• High noise immunity
• Complies with JEDEC standard:
• JESD8-7 (1.65 V to 1.95 V)
• JESD8-5 (2.3 V to 2.7 V)
• JESD8B/JESD36 (2.7 V to 3.6 V)
• ±24 mA output drive (VCC = 3.0 V)
• ESD protection:
• MIL-STD-883, method 3015 exceeds 2000 V
• HBM JESD22-A114F exceeds 2000 V
• MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
• CMOS low power consumption
• Inputs accept voltages up to 5 V
• Latch-up performance exceeds 250 mA
• Direct interface with TTL levels
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range
74LVC1G126GW-Q100 -40 °C to +125 °C
Name
TSSOP5
74LVC1G126GV-Q100 -40 °C to +125 °C SC-74A
Description
Version
plastic thin shrink small outline package; 5 leads; SOT353-1
body width 1.25 mm
plastic surface-mounted package; 5 leads
SOT753
Share Link: 