ADCMP573BCP 데이터 시트보기 (PDF) - Analog Devices

부품명

상세내역

제조사

ADCMP573BCP

Ultrafast 3.3 V Single-Supply Comparators

Analog Devices 

Preliminary Technical Data

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

SUPPLY VOLTAGES

Input Supply Voltage (VCCI to GND)

Output Supply Voltage

(VCCO to GND)

Positive Supply Differential

(VCCI − VCCO)

INPUT VOLTAGES

Input Voltage

Differential Input Voltage

Input Voltage, Latch Enable

HYSTERESIS CONTROL PIN

−0.5 V to +6.0 V

−0.5 V to +6.0 V

−0.5 V to +3.5 V

−0.5 V to VCCI + 0.5 V

±(VCCI + 0.5 V)

−0.5 V to VCCO + 0.5 V

Applied Voltage (HYS to GND)

−0.5 V to +1.5 V

Maximum Input/Output Current

±1 mA

OUTPUT CURRENT

ADCMP572 (CML)

ADCMP573 (RSPECL)

±20 mA

−35 mA

TEMPERATURE

Operating Temperature, Ambient

Operating Temperature, Junction

Storage Temperature Range

−40°C to +85°C

125°C

−65°C to +150°C

ADCMP572/ADCMP573

Thermal Considerations

The ADCMP572/ADCMP573 LFCSP 16-lead package has a θJA

(junction to ambient thermal resistance) of 70°C/W in still air.

Stress above those listed under Absolute Maximum Ratings may

cause permanent damage to the device. This is a stress rating

only and functional operation of the device at these or any other

conditions above those indicated in the operational sections of

this specification is not implied. Exposure to absolute maximum

rating conditions for extended periods may affect device

reliability.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

Rev. PrB | Page 5 of 16

Share Link: