VN808CM-E 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

VN808CM-E

Octal channel high side driver

STMicroelectronics 

VN808CM-E

Octal channel high side driver

Features

Type

VN808CM-E

RDS(on)

160 mΩ

Iout

0.7 A

VCC

45 V

■ CMOS compatible input

■ Junction overtemperature protection

■ Case overtemperature protection for thermal

independence of the channels

■ Current limitation

■ Shorted load protection

■ Undervoltage shutdown

■ Protection against loss of ground

■ Very low standby current

■ Compliance to 61000-4-4 IEC test up to 4 kV

Description

The VN808CM-E is a monolithic device designed

in STMicroelectronics VIPower M0-3 technology,

intended for driving any kind of load with one side

connected to ground. It can be driven by using a

3.3 V logic supply.

PowerSO-36

Active current limitation combined with thermal

shutdown and automatic restart, protect the

device against overload. In overload condition,

channel turns OFF and back ON automatically so

as to maintain junction temperature between TTSD

and TR. If this condition makes case temperature

reach TCSD, overloaded channel is turned OFF

and will restart only when case temperature has

decreased down to TCR(see waveform 3 Figure 6

on page 10). Non overloaded channels continue

to operate normally. Device automatically turns

OFF in case of ground pin disconnection. This

device is especially suitable for industrial

applications conform to IEC 61131

February 2010

Doc ID 11456 Rev 8

1/21

www.st.com

21

Share Link: