DS1330W 데이터 시트보기 (PDF) - Dallas Semiconductor -> Maxim Integrated
부품명
상세내역
제조사
DS1330W Datasheet PDF : 12 Pages
| |||
DS1330W
9. Each DS1330W has a built-in switch that disconnects the lithium source until VCC is first applied by
the user. The expected tDR is defined as accumulative time in the absence of VCC starting from the
time power is first applied by the user.
10. All AC and DC electrical characteristics are valid over the full operating temperature range. For
commercial products, this range is 0°C to 70°C. For industrial products (IND), this range is -40°C to
+85°C.
11. In a power-down condition the voltage on any pin may not exceed the voltage on VCC.
12. tWR1 and tDH1 are measured from WE going high.
13. tWR2 and tDH2 are measured from CE going high.
14. RST and BW are open drains and cannot source current. External pullup resistors should be
connected to these pins for proper operation. Both pins will sink 10mA.
15. DS1330 modules are recognized by Underwriters Laboratory (U.L.®) under file E99151.
DC TEST CONDITIONS
Outputs Open
Cycle = 200 ns for operating current
All voltages are referenced to ground
AC TEST CONDITIONS
Output Load: 100 pF + 1TTL Gate
Input Pulse Levels: 0 to 2.7V
Timing Measurement Reference Levels
Input: 1.5V
Output: 1.5V
Input pulse Rise and Fall Times: 5ns
ORDERING INFORMATION
Part Number
Temperature Range
Supply
Tolerance
DS1330WP-100
0°C to +70°C
3.3V ± 0.3V
DS1330WP-100+
0°C to +70°C
3.3V ± 0.3V
DS1330WP-100IND
-40°C to +85°C
3.3V ± 0.3V
DS1330WP-100IND+
-40°C to +85°C
3.3V ± 0.3V
DS1330WP-150
0°C to +70°C
3.3V ± 0.3V
DS1330WP-150+
0°C to +70°C
3.3V ± 0.3V
+ Denotes lead-free/RoHS-compliant product.
* DS9034PC or DS9034PCI (PowerCap) required. Must be ordered separately.
Pin/Package
34 / PowerCap*
34 / PowerCap*
34 / PowerCap*
34 / PowerCap*
34 / PowerCap*
34 / PowerCap*
Speed Grade
100ns
100ns
100ns
100ns
150ns
150ns
9 of 12
Share Link: 