TS3022IYST 데이터 시트보기 (PDF) - STMicroelectronics
부품명
상세내역
제조사
TS3022IYST Datasheet PDF : 20 Pages
| |||
TS3022
Electrical characteristics
2
Electrical characteristics
Table 3. Electrical characteristics at VCC+ = 2 V, VCC- = 0 V, Tamb = 25 ° C, and full Vicm range (unless otherwise
specified)
Symbol
Parameter
VIO
Input offset voltage
Test conditions (1)
-40 °C < Tamb < +125 °C, TS3021A
Min.
Typ.
0.5
ΔVio/ΔT Input offset voltage drift
-40 °C < Tamb < 125 °C
3
Tamb
1
IIO
Input offset current (2)
-40 °C < Tamb < +125 °C
Tamb
86
IIB
Input bias current (2)
-40 °C < Tamb < 125 °C
No load, output high, Vicm = 0 V
73
No load, output high, Vicm = 0 V,
-40 °C < Tamb < 125 °C
ICC
Supply current
No load, output low, Vicm = 0 V
84
No load, output low, Vicm = 0 V,
-40 °C < Tamb < 125 °C
Source
9
ISC
Short-circuit current
Sink
10
VOH
Output voltage high
Isource = 1 mA
-40 °C < Tamb < 125 °C
1.88
1.92
1.80
Isink = 1 mA
60
VOL
Output voltage low
-40 °C < Tamb < 125 °C
CMRR
Common mode rejection
ratio
0 < Vicm < 2 V
67
SVR Supply voltage rejection
∆Vcc = 2 to 5 V
58
73
TPLH
Propagation delay, low to
high output level (3)
Vicm = 0 V, f = 10 kHz, CL = 50 pF,
overdrive = 100 mV
Vicm = 0 V, f = 10 kHz, CL = 50 pF,
overdrive = 20 mV
38
48
TPHL
Propagation delay, high to
low output level (4)
Vicm = 0 V, f = 10 kHz, CL = 50 pF,
overdrive = 100 mV
Vicm = 0 V, f = 10 kHz, CL = 50 pF,
overdrive = 20 mV
40
49
TF
Fall time
f = 10 kHz, CL = 50 pF, RL = 10 kΩ,
overdrive = 100 mV
8
TR
Rise time
f = 10 kHz, CL = 50 pF, RL = 10 kΩ,
overdrive = 100 mV
9
1. All values over the temperature range are guaranteed through correlation and simulation. No production test
is performed at the temperature range limits.
2. Maximum values include unavoidable inaccuracies of the industrial tests
3. Response time is measured at 50% of the final output value with the following conditions: inverting input
voltage (IN-) = Vicm and non-inverting input voltage (IN+) moving from Vicm - 100 mV to Vicm + overdrive.
4. Response time is measured at 50% of the final output value with the following conditions: inverting input
voltage (IN-) = Vicm and non-inverting input voltage (IN+) moving from Vicm + 100 mV to Vicm - overdrive.
Max.
6
7
20
20
100
160
300
90
115
105
125
100
150
60
75
60
75
Unit
mV
µV/°C
nA
µA
mA
V
mV
dB
ns
DS6029 - Rev 5
page 3/20
Share Link: 