PAN9026 Wi-Fi/BT Module
Overview
The PAN9026 is a 2.4/5 GHz ISM band Wi-Fi and
Bluetooth radio module, which includes a wireless
radio for easy integration of Wi-Fi and
Bluetooth connectivity into various electronic
devices.
Features
• Dual band 2.4/5 GHz 802.11 a/b/g/n Wi-Fi/BT
combo module
• Supports 802.11i security standards through
AES, CCMP, and more security mechanisms
• 802.11e Quality of Service is supported for
multimedia applications
• IEEE 802.11n-compliant, 1x1 spatial stream with
data rates up to MCS7 150 Mbps
• Bluetooth 5.0 (includes LE)
• Dual simultaneous and independent WLAN and
Bluetooth operation
• Dynamic Rapid Channel Switching (DRCS) for
simultaneous operation in 2.4 GHz and 5 GHz
bands
• Indoor location and navigation with
IEEE 802.11mc
• Power management with sleep clock
• Coexistence interface for arbitration of co-
located WLAN, Bluetooth, or Mobile Wireless
System (e.g. LTE)
• Generic interfaces include SDIO 3.0 and high-
speed UART for host processor connection
• Software Linux driver
Characteristics
• Surface Mount Type (SMT)
17.5 mm x 10.0 mm x 2.6 mm
• Marvell® 88W8977 WLAN 2.4/5 GHz and
Bluetooth single-chip solution inside
• TX Power +16 dBm @ 802.11b
• RX Sensitivity -98 dBm @ 802.11b DSSS
1 Mbps
• IEEE 802.11n 20 MHz and 40 MHz
channel bandwidth
• Long and Short Guard Interval support
• Power supply 3.3 V, 2.2 V, 1.8 V
• Current consumption Wi-Fi typical 400 mA @ TX
and 70 mA @ RX
• SDIO 1-bit or 4-bit
• Wide temperature range of -30 to +85 °C
Block Diagram
SPI
Status LED's
MCU Ready
Factory Reset
Wake Up's
V SPDT
VIO 1.8 V
VDD 2.2 V
VDD 1.8 V
32 kHz DISABLE
Crystal
26 MHz
Crystal
32.768 kHz
PAN9026
Wi-Fi & Bluetooth Radio Module
IEEE 802.11 a/b/g/n
Bluetooth 5.0 (BR, LE & EDR)
GPIOs
PDN
JTAG
UART
COEX
88W8977
Radio SoC
BPF
SPDT DPX
Chip
Antenna
VIO SD
SDIO Interface
PCM Interface
CNTL VIO RF 3.3 V
SPDT
RF SW RF Pad
Product Specification Rev. 1.1
Page 2