LG1626DXC 데이터 시트보기 (PDF) - Agere -> LSI Corporation

부품명

상세내역

제조사

LG1626DXC

Modulator Driver

Agere -> LSI Corporation 

LG1626DXC Modulator Driver

Data Sheet

February 1999

Absolute Maximum Ratings (at TA = 25 °C unless otherwise specified)

Table 2. Absolute Maximum Ratings

Parameter

Symbol

Min

Max

Unit

Supply Voltage

VSS

—

5.75

V

Input Voltage

VI

GND

VSS

V

Power Dissipation

PD

—

1

W

Storage Temperature Range

Tstg

–40

125

°C

Operating Temperature Range

TC

0

100

°C

Handling Precautions

Although protection circuitry has been designed into this device, proper precautions should be taken to avoid expo-

sure to electrostatic discharge (ESD) during handling and mounting. Lucent employs a human-body model (HBM)

and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation. ESD voltage

threshold are dependent on the circuit parameters used to define the model. No industry-wide standard has been

adopted for the CDM. However, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is widely used and

therefore, can be used for comparision. The HBM ESD threshold presented here was obtained by using these cir-

cuit parameters.

Table 3. ESD Threshold Voltage

Human-Body Model ESD Threshold

Device

LG1626DXC

Voltage

>200 V

Mounting and Connections

Cetain precautions must be taken when using solder. For installation using a constant temperature solder, temper-

atures of under 300 °C may be employed for periods of time up to 5 seconds, maximum. For installation with a sol-

dering iron (battery operated or nonswitching only), the soldering tip temperature should not be greater than

300 °C and the soldering time for each lead must not exceed 5 seconds. This device is supplied with solder on the

back of the package. For optimum performance, it is recommended to solder the back of the package to the

ground.

4

Lucent Technologies Inc.

Share Link: