MC10ELT26D 데이터 시트보기 (PDF) - Motorola => Freescale
부품명
상세내역
제조사
MC10ELT26D Datasheet PDF : 2 Pages
| |||
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Product Preview
1:2 Fanout Differential PECL
to TTL Translator
The MC10ELT/100ELT26 is a 1:2 fanout differential PECL to TTL
translator. Because PECL (Positive ECL) levels are used only +5V and
ground are required. The small outline 8-lead SOIC package and the 1:2
fanout design of the ELT23 makes it ideal for applications which require
the low skew duplication of a signal in a tightly packed PC board.
Because the mature MOSAIC 1.5 process is used, low cost can be added
to the list of features.
The VBB output allows the ELT26 to also be used in a single-ended
input mode. In this mode the VBB output is tied to the IN input for a
non-inverting buffer or the IN input for an inverting buffer. If used the VBB
pin should be bypassed to ground via a 0.01µF capacitor.
The ELT26 is available in both ECL standards: the 10ELT is compatible
with positive MECL 10H logic levels while the 100ELT is compatible with
positive ECL 100K logic levels.
• 3.5ns Typical Propagation Delay
• <500ps Typical Output to Output Skew
• Differential PECL Inputs
• Small Outline SOIC Package
• 24mA TTL Outputs
• Flow Through Pinouts
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
NC 1
D2
D3
8 VCC
7 Q0
TTL
6 Q1
VBB 4 PECL
5 GND
MC10ELT26
MC100ELT26
8
1
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751-05
PIN DESCRIPTION
PIN
Qn
D
VCC
VBB
GND
FUNCTION
TTL Outputs
Diff PECL Input
+5.0V Supply
Reference Output
Ground
This document contains information on a product under development. Motorola reserves the right to
change or discontinue this product without notice.
1/95
© Motorola, Inc. 1996
3–1
REV 2
Share Link: 