NJU6475B
(3-2) Initialization using the internal reset circuit
When internal reset operates for initialization, the function set, Display ON/OFF Control and Entry Set instruc-
tion must be executed before the data input as shown below.
Power On
Function Set
Initialized
No display appears
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
0 0 0 0 1 * * * * 1 Power down mode OFF
Display ON/OFF
Control
Turn on display and cursor.
0 0 0 0 0 0 1 1 1 0 Entire display is in space
mode. In case of mark dis-
play function, the contens
of MK RAM should be ini-
tialized by instruction be-
fore the display on.
Entry Mode Set
Example for address incre-
0 0 0 0 0 0 0 1 1 0 ent and cursor right shift
when the data is written to
the DD, CG or MK RAM.
Write data to the DD, CG or MK RAM
and set the instruction