LPC2292 데이터 시트보기 (PDF) - NXP Semiconductors.
부품명
상세내역
제조사
LPC2292
NXP Semiconductors.
LPC2292 Datasheet PDF : 54 Pages
| |||
NXP Semiconductors
LPC2292/LPC2294
16/32-bit ARM microcontrollers with external memory interface
Table 4. Pin description …continued
Symbol
Pin (LQFP) Pin
(TFBGA)[1]
P0[12]/DSR1/ 84[2]
MAT1[0]/RD4
J13[2]
P0[13]/DTR1/ 85[2]
MAT1[1]/TD4
H10[2]
P0[14]/DCD1/ 92[4]
EINT1
G10[4]
Type
I
O
I
O
O
O
I
I
P0[15]/RI1/
EINT2
99[4]
E11[4]
I
I
P0[16]/EINT0/ 100[4]
E10[4]
I
MAT0[2]/
O
CAP0[2]
I
P0[17]/CAP1[2]/ 101[2]
D13[2]
I
SCK1/MAT1[2]
I/O
O
P0[18]/CAP1[3]/ 121[2]
D8[2]
I
MISO1/MAT1[3]
I/O
O
P0[19]/MAT1[2]/ 122[2]
C8[2]
O
MOSI1/CAP1[2]
I/O
I
P0[20]/MAT1[3]/ 123[4]
B8[4]
O
SSEL1/EINT3
I
I
P0[21]/PWM5/ 4[2]
RD3/CAP1[3]
C1[2]
O
I
I
P0[22]/TD3/
5[2]
CAP0[0]/
MAT0[0]
D4[2]
O
I
O
P0[23]/RD2
6[2]
D3[2]
I
P0[24]/TD2
8[2]
D1[2]
O
P0[25]/RD1
21[2]
H1[2]
I
Description
DSR1 — Data Set Ready input for UART1.
MAT1[0] — Match output for Timer 1, channel 0.
RD4 — CAN4 receiver input (LPC2294 only).
DTR1 — Data Terminal Ready output for UART1.
MAT1[1] — Match output for Timer 1, channel 1.
TD4 — CAN4 transmitter output (LPC2294 only).
DCD1 — Data Carrier Detect input for UART1.
EINT1 — External interrupt 1 input.
Note: LOW on this pin while RESET is LOW forces on-chip
bootloader to take over control of the part after reset.
RI1 — Ring Indicator input for UART1.
EINT2 — External interrupt 2 input.
EINT0 — External interrupt 0 input.
MAT0[2] — Match output for Timer 0, channel 2.
CAP0[2] — Capture input for Timer 0, channel 2.
CAP1[2] — Capture input for Timer 1, channel 2.
SCK1 — Serial Clock for SPI1/SSP[3]. SPI clock output from
master or input to slave.
MAT1[2] — Match output for Timer 1, channel 2.
CAP1[3] — Capture input for Timer 1, channel 3.
MISO1 — Master In Slave Out for SPI1/SSP[3]. Data input to
SPI master or data output from SPI slave.
MAT1[3] — Match output for Timer 1, channel 3.
MAT1[2] — Match output for Timer 1, channel 2.
MOSI1 — Master Out Slave In for SPI1/SSP[3]. Data output
from SPI master or data input to SPI slave.
CAP1[2] — Capture input for Timer 1, channel 2.
MAT1[3] — Match output for Timer 1, channel 3.
SSEL1 — Slave Select for SPI1/SSP[3]. Selects the SPI
interface as a slave.
EINT3 — External interrupt 3 input.
PWM5 — Pulse Width Modulator output 5.
RD3 — CAN3 receiver input (LPC2294 only).
CAP1[3] — Capture input for Timer 1, channel 3.
TD3 — CAN3 transmitter output (LPC2294 only).
CAP0[0] — Capture input for Timer 0, channel 0.
MAT0[0] — Match output for Timer 0, channel 0.
RD2 — CAN2 receiver input.
TD2 — CAN2 transmitter output.
RD1 — CAN1 receiver input.
LPC2292_2294_6
Product data sheet
Rev. 06 — 10 December 2007
© NXP B.V. 2007. All rights reserved.
9 of 54
Share Link: