¡ Semiconductor
FEDL9005-03
MSM9005-xx
[How to transfer LPA command, ABBC 1/5 command and CHB command (character blink
setting)]
LPA
command
CHB
command
CHB
command
D8 D7 D6 D5 D4 D3 D2 D1
11*00000
Specify the address pointer value.
(Example: Set the address pointer value to 00H.)
D8 D7 D6 D5 D4 D3 D2 D1
0 * * * 0 0 CB * CB value is written to CHB RAM address 00H and the
blinking of characters displayed in segments 1 to 5 is set.
After this command is executed, the address pointer value
D8 D7 D6 D5 D4 D3 D2 D1
0 * * * 0 0 CB *
becomes 01H.
CB value is written to CHB RAM address 01H, and the
blinking of characters displayed in segments 6 to 10 is set.
After this command is executed, the address pointer value
becomes 02H.
(Repeats nine times.)
CHB
command
D8 D7 D6 D5 D4 D3 D2 D1
0 * * * 0 0 CB *
CB value is written to CHB RAM address 0BH and the
blinking of characters displayed in segments 56 to 60 is set.
After this command is executed, the address pointer value
becomes 0CH.
CHB
command
D8 D7 D6 D5 D4 D3 D2 D1
0 * * * 0 0 CB *
CB value is written to CHB RAM address 0CH, and the
blinking of characters displayed in segments 61 to 65 is set.
After this command is executed, the address pointer value
becomes 0DH.
CHB
command
D8 D7 D6 D5 D4 D3 D2 D1
0 * * * 0 0 CB *
CHB RAM address is only 00H to 0CH. The address
pointer value becomes 0DH. However, this CHB
command is ignored.
*: Don't care
20/30