S-818A55AMC-BHJT2G 데이터 시트보기 (PDF) - Seiko Instruments Inc

부품명

상세내역

제조사

S-818A55AMC-BHJT2G

LOW DROPOUT CMOS VOLTAGE REGULATOR

Seiko Instruments Inc 

Rev.2.1_00

LOW DROPOUT CMOS VOLTAGE REGULATOR

S-818 Series

4. Load regulation (∆VOUT3)

Load regulation indicates the output current dependence of output voltage. The value shows how much

the output voltage changes due to the change of the output current when the input voltage is kept

constant.

5. Dropout voltage (Vdrop)

Let VIN1 be an input voltage where the output voltage falls to the 98 % of the actual output voltage

(VOUT(E)) when gradually decreasing input voltage. The dropout voltage is the difference between the VIN1

and the resultant output voltage defined as following equation.

Vdrop=VIN1−(VOUT(E)×0.98)

6. Temperature coefficient of output voltage  ∆VOUT 

 ∆Ta • VOUT 

The output voltage lies in the shaded area in the whole operating temperature shown in Figure 11 when

the temperature coefficient of the output voltage is ±100 ppm/°C.

VOUT [V]

+0.28mV/°C

VOUT(E)*1

−0.28mV/°C

−40

25

85

Ta [°C]

*1. The value of the output voltage measured at 25°C.

Figure 11 Temperature coefficient of output voltage (Ex. Typ. product for S-818A28A)

Temperature change ratio for output voltage [mV/°C] is calculated by using the following equation.

[ ] [ ] [ ] ∆VOUT mV/°C *1 = VOUT(S) V *2 × ∆VOUT ppm/°C *3 ÷ 1000

∆Ta

∆Ta • VOUT

*1. Temperature change ratio for output voltage

*2. Specified output voltage

*3. Output voltage temperature coefficient

Seiko Instruments Inc.

11

Share Link: