EL5111T 데이터 시트보기 (PDF) - Renesas Electronics
부품명
상세내역
제조사
EL5111T Datasheet PDF : 14 Pages
| |||
EL5111T
Power Supply Bypassing and Printed Circuit
Board Layout
The EL5111T can provide gain at high frequency, so good
printed circuit board layout is necessary for optimum
performance. Ground plane construction is highly
recommended, trace lengths should be as short as
possible and the power supply pins must be well
bypassed to reduce any risk of oscillation.
For normal single supply operation (the VS- pin is
connected to ground) a 4.7µF capacitor should be placed
from VS+ to ground, then a parallel 0.1µF capacitor
should be connected as close to the amplifier as possible.
One 4.7µF capacitor may be used for multiple devices.
For dual supply operation the same capacitor
combination should be placed at each supply pin to
ground.
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to
web to make sure you have the latest Rev.
DATE
REVISION
CHANGE
5/27/10
FN6894.0 Initial Release.
Products
Intersil Corporation is a leader in the design and manufacture of high-performance analog semiconductors. The
Company's products address some of the industry's fastest growing markets, such as, flat panel displays, cell phones,
handheld products, and notebooks. Intersil's product families address power management and analog signal
processing functions. Go to www.intersil.com/products for a complete list of Intersil product families.
*For a complete listing of Applications, Related Documentation and Related Parts, please see the respective device
information page on intersil.com: EL5111T
To report errors or suggestions for this datasheet, please go to www.intersil.com/askourstaff
FITs are available from our website at http://rel.intersil.com/reports/search.php
FN6894 Rev 0.00
May 27, 2010
Page 13 of 14
Share Link: 