ACS8522 데이터 시트보기 (PDF) - Semtech Corporation
부품명
상세내역
제조사
ACS8522 Datasheet PDF : 118 Pages
| |||
ACS8522 SETS LITE
ADVANCED COMMUNICATIONS
FINAL
Figure 4 Automatic Mode Control State Diagram
(1) Reset
Free-run
select ref
(state 001)
DATASHEET
(3) no valid standby ref
&
(main ref invalid
or out of lock > 100s
(2) all refs evaluated
&
at least one ref valid
Reference sources are flagged as valid when
active, in-band and have no phase alarm set.
(4) valid standby ref
&
[main ref invalid or
(higher-priority ref valid
& in revertive mode) or
out of lock > 100s]
Pre-locked
wait for up to 100s
(state 110)
(5) selected ref
phase locked
All sources are continuously checked for
activity and frequency
Only the main source is checked for phase.
A phase lock alarm is only raised on a
reference when that reference has lost phase
whilst being used as the main reference. The
micro-processor can reset the phase lock
alarm.
A source is considered to have phase locked
when it has been continuously in phase lock
for between 1 and 2 seconds.
(10) selected source
phase locked
Locked
keep ref
(state 100)
(6) no valid standby ref
&
main ref invalid
Pre-locked2
wait for up to 100s
(state 101)
(8) phase
(9) valid standby ref regained
&
within 100s
[main ref invalid or
(higher priority ref valid
& in revertive mode)]
(7) phase lost
on main ref
(12) valid standby ref
&
(main ref invalid
or out of lock >100s)
Lost-phase
wait for up to 100s
(state 111)
(11) no valid standby ref
&
(main ref invalid
or out of lock >100s)
Holdover
select ref
(state 010)
(15) valid standby ref
&
[main ref invalid or
(higher-priority ref valid
& in revertive mode) or
out of lock >100s]
(13) no valid standby ref
&
(main ref invalid
or out of lock >100s)
(14) all refs evaluated
&
at least one ref valid
F8530D_018AutoModeContStateDia_02
Revision 5/November 2006 © Semtech Corp.
Page 16
www.semtech.com
Share Link: 